Best current price£23.99from eBay
Shopping.co.uk recommended and popular offers
eBay£23.99Visit shop 4x Bartoline All Purpose Ready Mix Filler Plaster Wood Brick Stone Repair 2.5kg
Visit shop
B&Q£31.99Visit shop B&Q - 4X All Purpose Ready Mix Filler Plaster Wood Brick Stone Repair 2.5Kg
Visit shop3 offers from £23.99 - £33.99
View price history by clicking the chart icon.
The Bartoline All Purpose Ready Mix Filler is designed for DIY enthusiasts and professionals tackling interior and exterior repairs on various surfaces. Its key benefit is ease of use, allowing for quick filling and sanding to a smooth finish. A potential caveat is its suitability for surfaces not regularly exposed to water or submersion.
| Colour | White |
|---|---|
| Model Part Number | RM9230 |
| Brand | Bartoline |
It is best used on bare plaster, plasterboard, wood, brick, or stone. Applying directly over wallpaper might lead to adhesion issues or damage the wallpaper when sanding.
Drying time varies depending on layer thickness, temperature, and humidity. For thin layers, it typically dries enough to sand within a few hours.
Yes, the filler dries white and is suitable for painting over once fully dry and sanded.
For deep holes, apply the filler in layers no more than 6mm thick, allowing each layer to set before applying the next. Do not attempt to fill very deep holes in a single application.
Store in its original container with the lid firmly replaced in a cool, dry place. Protect from frost, as freezing can damage the product.
Yes, for exterior use, it is essential to seal the filled area with an oil-based paint to protect it from rain and water.
The product description specifies use on plaster, plasterboard, brick, wood, and stone. It is not recommended for metal surfaces.
Ensure the lid was sealed properly after the last use. If slightly dry, try stirring vigorously. For very dry filler, it may be unusable.
Apply the filler in thinner layers (max 6mm) and allow each layer to set completely before applying the next.
Ensure the filler is fully dry before sanding. If still difficult, you may need to use a coarser grit sandpaper initially, followed by a finer grit for a smooth finish.
Ensure the surface is clean, dry, and free from dust, grease, or loose paint before application. Prime if necessary, especially on porous surfaces.
Setup: No setup is required; the filler is ready to use straight from the container. Ensure the surface to be filled is clean, dry, and free from dust before application. For larger areas, apply the filler in layers no thicker than 6mm, allowing each layer to set before applying the next. Overfill slightly to allow for sanding down to a fine finish.
Compatibility: This filler is compatible with plaster, plasterboard, brick, wood, and stone. For exterior use, it must be sealed with an oil-based paint to protect it from the elements. Do not use on surfaces that are regularly under water.
Care: After use, ensure the lid is replaced firmly to maintain the filler's consistency. Clean tools immediately with water before the filler begins to harden. Store the product in a location protected from frost.
