Lexar ARES PRO 2TB Gen5 NVMe M.2 SSD - Lexar - ARES PRO
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Lexar ARES PRO 2TB Gen5 NVMe M.2 SSD is designed for power users, professional video editors, and gamers who demand top-tier read and write speeds for data-intensive workflows. Utilizing cutting-edge PCIe 5.0 x4 technology, it provides massive performance gains for modern systems, though users should be aware that it requires a PCIe 5.0 compatible motherboard to reach its full rated speed potential.
All features
| Series | ARES PRO |
|---|---|
| Brand | Lexar |
Extended Product Information
FAQs
Is this SSD backward compatible with PCIe 4.0 systems?
Yes, it is backward compatible, but you will be limited to the maximum transfer speed of the PCIe 4.0 interface.
Can I use this drive in my PlayStation 5?
Yes, it meets or exceeds the requirements for PS5 internal storage expansion.
Does it come with a heatsink?
The drive features an advanced thermal management system designed to maintain stability under load.
How long is the warranty coverage?
The Lexar ARES PRO is backed by a 5-year limited warranty.
What software should I use to monitor the drive?
It is recommended to use Lexar's official SSD management software for firmware updates and health monitoring.
Troubleshooting
Drive not detected in BIOS
Ensure the drive is fully seated in the M.2 slot and verify that the motherboard BIOS is updated to support PCIe 5.0 devices.
Speeds seem slower than 14,000 MB/s
Check if the drive is installed in a PCIe 4.0 slot instead of a PCIe 5.0 slot, as speeds will be capped by the interface bandwidth.
High drive temperature warnings
Ensure the included thermal management solution is correctly applied and that your system case has adequate intake and exhaust fans.
Pros and Cons
Pros
- Extreme read speeds up to 14,000 MB/s
- Advanced thermal design for stable performance
- Broad compatibility with PC and PS5
- 5-year limited warranty for long-term reliability
Cons
- Requires PCIe 5.0 motherboard for maximum performance
- Thermal solution requires adequate case airflow
- Higher power draw compared to older Gen3/Gen4 drives
Setup, Compatibility & Care
To install the Lexar ARES PRO, ensure your motherboard has an M.2 slot that supports PCIe 5.0. If using a motherboard with an integrated M.2 heatsink, you may need to remove the SSD's factory cooling cover or align the thermal pads carefully. Once installed, initialize the drive via your operating system's disk management tool to allocate partition space. For optimal longevity, ensure your PC case has good airflow, as Gen5 SSDs operate best when not restricted by trapped heat. Firmware updates can be managed through Lexar’s software utility to ensure continued compatibility and stability.