Multicomp Pro Test Lead - 4mm Banana Plug to Plug, 1m, Red - 76-114
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Multicomp Pro 76-114 is a 1-meter red 4mm banana plug to 4mm banana plug test lead designed for general-purpose low-voltage electrical testing, control, and measurement applications. It provides reliable connections to standard 4mm jacks, sockets, and binding posts, featuring a double jacket wire for durability and a visible wear indicator. While suitable for many common tasks, users should be mindful of its electrical safety rating for specific applications.
All features
| Model Part Number | 76-114 |
|---|---|
| Brand | Multicomp Pro |
Extended Product Information
FAQs
What is the maximum voltage and current rating for this lead?
The electrical safety rating is 33VAC / 70VDC and 12A (at +40°C).
What is the length of the lead?
The visible length of the wire is 1 meter (100cm).
What materials are the connectors made of?
The connectors are nickel-coated brass with a red annealed copper conductor.
What is the purpose of the double jacket wire?
The double jacket wire provides enhanced durability and includes a visible wear indicator for safety.
Can this lead be used for high-power applications?
No, this lead is designed for very low voltage general-purpose electric testing and is rated for a maximum of 12A at +40°C. It is not suitable for high-power applications.
What is the operating temperature range?
The operating temperature range is from -20°C to +80°C.
What type of wire jacket is used?
The wire jacket can be PVC or silicone.
What warranty is provided with this product?
The product comes with a 12-month limited warranty.
Troubleshooting
No connection or intermittent signal
Check that both banana plugs are fully inserted into the jacks/sockets. Inspect the plugs and jacks for dirt or corrosion and clean if necessary. Verify the connected equipment is functioning correctly and within the lead's electrical specifications.
Lead feels stiff or inflexible
This may be due to the operating temperature. Allow the lead to reach room temperature if stored in a cold environment. Ensure the wire jacket material (PVC or silicone) is appropriate for your operating conditions.
Visible damage to the wire jacket
If the wear indicator is exposed or the outer jacket is significantly damaged, discontinue use immediately to avoid electrical hazards. Replace the lead.
Pros and Cons
Pros
- Reliable and secure banana plug connections
- Durable construction with visible wear indicator
- Suitable for low-voltage general-purpose testing
- Good conductivity due to quality materials
- Convenient 1-meter length for most tasks
Cons
- Limited electrical safety rating (33VAC / 70VDC) restricts use in high-voltage applications
- Maximum operating temperature of 40°C for the 12A rating
- Not designed for high-current applications beyond 12A
- Wear indicator requires visual inspection for safety checks
Setup, Compatibility & Care
Setup:
- Ensure the banana plugs are clean and free from debris.
- Insert the 4mm male banana plugs firmly into compatible 4mm banana jacks, sockets, or binding posts.
- Verify the connection is secure before applying power or conducting measurements.
Compatibility:
The 76-114 lead is compatible with any standard 4mm banana jack, socket, or binding post. It is intended for low-voltage applications up to 33VAC / 70VDC and a maximum of 12A at +40°C. Ensure your equipment and application fall within these parameters.
Care:
- Cleaning: Wipe the connectors and wire jacket with a clean, dry or slightly damp cloth. Avoid using solvents or abrasive cleaners.
- Inspection: Regularly check the wire for any signs of damage, cuts, or excessive wear, especially around the connectors. Pay attention to the wear indicator on the double jacket wire.
- Storage: Store the lead in a dry place, away from extreme temperatures and sharp objects, to prevent damage.