Containing over 60% less plastic compared to a 1.2L bottle, the Triplewax Vortex Blast Snow Foam P...Containing over 60% less plastic compared to a 1.2L bottle, the Triplewax Vortex Blast Snow Foam Pouch coats your vehicle in a deep cleaning foam that loosens and lifts all types of dirt and grime without stripping wax or sealant layers. Developed for use with a pressure washer and snow foam lance. Can be used as a pre-wash before applying a shampoo such as Triplewax Wash & Wax. For an outstanding, long-lasting shine apply Triplewax Carnauba Wax after cleaning. Directions for Use: Shake product well before use Use your pressure washer to rinse the vehicle from top to bottom Place pouch on flat surface. Hold base of cap with one hand and unscrew cap with the other hand Pour 100ml into a 1 litre snow foam lance and fill with water Spray onto the surface of your vehicle, working from bottom to top To use as a pre-wash: let the foam settle for approximately 5 minutes - do not allow the foam to dry on the vehicle surface. Rinse with a pressure washer, working from top to bottom. To use as a high foam shampoo: Agitate the snow foam on the surface of the vehicle using a sponge, cloth or wash mitt. Rinse with a pressure washer, working from top to bottom. Note: Recycle with bags at large supermarket. Store in an upright position and secure when transported. Using a snow foam helps to loosen the bigger bits of dirt and remove them from the surface. This firstly prevents swirl marks and scratches by not contact cleaning when it is very dirty, and secondly allows your contact clean shampoo to work more effectively as it doesn't have as much dirt and grime to get through before it can clean the surface.
The Triplewax Vortex Blast Snow Foam Pouch is designed for car enthusiasts seeking an effective pre-wash solution. Its key benefit is a deep-cleaning foam that loosens dirt without harming existing wax or sealant layers. A potential caveat is that it requires a pressure washer and snow foam lance for optimal use. This product offers a more eco-friendly approach with less plastic compared to traditional bottles, efficiently lifting grime to prepare your vehicle for a thorough wash.
All features
Model Part Number
VORTEXBLAST1.2LX4
Brand
Triplewax
Extended Product Information
FAQs
What is the main purpose of the Triplewax Vortex Blast Snow Foam Pouch?
Its main purpose is to act as a pre-wash to loosen and lift dirt and grime from your vehicle's surface before the main wash, helping to prevent scratches.
Do I need a special type of pressure washer?
The product is designed for use with a standard pressure washer and a snow foam lance. Ensure your pressure washer is compatible with such accessories.
How much product should I use?
You should use 100ml of the product in a 1-litre snow foam lance, and then fill the remainder of the lance with water.
Can I use this product on its own as a car shampoo?
Yes, it can be used as a high-foam shampoo. After spraying, you would agitate the foam on the surface with a sponge or wash mitt before rinsing.
How long should I leave the foam on the car?
Let the foam dwell on the surface for approximately 5 minutes. Crucially, do not allow the foam to dry on the vehicle's surface.
Is this product environmentally friendly?
Yes, the pouch design uses over 60% less plastic compared to a traditional 1.2L bottle.
What should I do after rinsing the snow foam?
After rinsing, you can proceed with a contact wash using a car shampoo like Triplewax Wash & Wax, or apply a protective coating such as Triplewax Carnauba Wax for shine.
How do I dispose of the pouch?
The pouch can be recycled with bags at large supermarket collection points.
Troubleshooting
Foam is not thick or clinging
Ensure the product has been shaken well before use. Verify the correct dilution ratio (100ml per litre) and check that the snow foam lance is clean and functioning correctly with the pressure washer.
Foam is drying too quickly on the surface
Work in smaller sections or on a cooler day. Do not allow the foam to dwell for longer than the recommended 5 minutes. Rinse the vehicle thoroughly and promptly.
Product seems to be stripping wax/sealant
Ensure you are using the product as a pre-wash and not allowing it to dry. Double-check the dilution ratio and confirm that you are not using an excessively high pressure setting on your washer, which could affect delicate surfaces.
Pouch is difficult to open
Hold the base of the cap firmly with one hand and twist the cap counter-clockwise with the other hand to unscrew it.
Pros and Cons
Pros
Reduces plastic waste compared to traditional bottles.
Effectively loosens and lifts dirt and grime.
Safe for existing wax and sealant layers.
Helps prevent swirl marks and scratches.
Improves the effectiveness of subsequent washing steps.
Cons
Requires a pressure washer and snow foam lance.
Foam must not be allowed to dry on the vehicle surface.
Best results are achieved when used with other Triplewax products.
Pouch disposal requires recycling with bags at large supermarkets.
Setup, Compatibility & Care
Setup:
Shake Well: Always shake the pouch thoroughly before use.
Prepare Foam Lance: Pour 100ml of the product into a 1-litre snow foam lance.
Add Water: Fill the remainder of the lance with water.
Attach Lance: Connect the foam lance to your pressure washer.
Compatibility:
Developed for use with a pressure washer and a snow foam lance.
Compatible as a pre-wash before using any car shampoo, including Triplewax Wash & Wax.
Can be followed by carnauba wax for enhanced shine.
Care & Storage:
Store the pouch in an upright position.
Secure the pouch properly when transporting it to prevent leaks or spills.
Recycle the pouch by taking it with bags to a large supermarket recycling point.