Jubilee Hose Pipe Clamps - 12-22mm - 50Pc
Best current price£7.85from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£7.85Visit shop B&Q - Jubilee Hose Pipe Clamps Clips Air Water Fuel Gas 50Pc Stainless Steel 1222mm
Visit shopB&Q£7.85Visit shop One Offer
1 offer from £7.85
View price history by clicking the chart icon.
B&QB&Q - Jubilee Hose Pipe Clamps Clips Air Water Fuel Gas 50Pc Stainless Steel 1222mm
Free delivery in 1–3 days
£7.85
Visit shop
Product Information
Full details
The AB Tools 50-piece Jubilee Hose Clamp set is an essential toolkit addition for professional mechanics, DIY enthusiasts, and home maintenance users who need a reliable solution for securing connections in air, water, fuel, and gas lines. These clamps offer exceptional tightening torque and durability for hoses ranging from 12mm to 22mm, though users should ensure their hose outer diameter falls strictly within this range to prevent seal failure or over-tightening.
All features
| Model Part Number | AT855_5PK |
|---|---|
| Brand | AB Tools |
Extended Product Information
FAQs
Are these clamps suitable for fuel lines?
Yes, they are designed to be compatible with fuel, water, and gas lines, provided the hose diameter is within the 12mm-22mm range.
Can these be used outdoors?
Yes, they feature rust and corrosion-resistant properties suitable for both indoor and outdoor environments.
What tool is needed for installation?
A standard flathead screwdriver or a 7mm socket driver is typically required to tighten the worm gear.
Does this pack include different sizes?
No, this specific pack (AT855_5PK) consists of 50 pieces, all designed for the 12mm to 22mm diameter range.
Can these be reused?
While they can be reused, you should inspect the band for warping or teeth damage before re-installing to ensure a safe seal.
Troubleshooting
Clamp slips under pressure
Ensure the hose diameter is between 12mm and 22mm. If the hose is too small, the clamp will bottom out before securing.
Screw is difficult to turn
Check for debris in the gear slots or apply a small amount of penetrating lubricant to the screw housing.
Leak persists after tightening
Verify the hose is pushed completely over the barb and the clamp is positioned centrally over the barb area, not over the bare tubing.
Pros and Cons
Pros
- Comprehensive 50-piece pack offers excellent value for bulk needs
- Rust and corrosion-resistant finish for longevity
- High-torque design ensures consistent sealing performance
- Suitable for a wide range of fluids including fuel, water, and gas
Cons
- Size range limited specifically to 12mm-22mm hoses
- Requires a flathead screwdriver or dedicated socket driver for installation
- Not intended for high-pressure industrial hydraulic systems
Setup, Compatibility & Care
To install, slide the clamp over the hose before attaching the hose to the barbed fitting. Once the hose is seated, position the clamp approximately 5mm to 10mm from the end of the hose and tighten the worm gear screw clockwise. Avoid overtightening, as this can cause the clamp to pinch or slice through softer silicone hoses. Inspect the clamps during routine maintenance; if the screw shows signs of binding or if the band has been deformed by excessive tightening, replace the clamp to maintain a secure connection. Keep the screw mechanism clean and occasionally apply a light machine oil if used in highly corrosive environments to ensure the adjustment remains smooth.