Best current price£6.99from My Motor World
Shopping.co.uk recommended and popular offers
My Motor World£6.99Visit shop Hycote Grey Ford Nimbus Metallic Double Acrylic Spray Paint 150Ml
Visit shop7 offers from £6.99 - £50.99
View price history by clicking the chart icon.
This Hycote Double Acrylic Spray Paint in Ford Nimbus Grey (150ml) is designed for automotive touch-ups and general craft use, offering excellent coverage and a durable finish. Its key benefit is the concentrated formula providing double the coverage of standard aerosols. A potential caveat is the need for careful surface preparation to ensure optimal adhesion and finish quality.
| Colour | Grey |
|---|---|
| Model Part Number | XDFD406 |
| Brand | Hycote |
| Container Volume | 150ml |
The 'Double Acrylic' technology means the can contains more paint relative to propellant, offering double the coverage of standard spray paints.
Yes, it can be used on plastics, but for best adhesion and results, it is recommended to use a dedicated plastic primer first.
The paint is fast-drying, allowing for recoating typically within a few minutes, although full hardness may take longer.
The manufacturer paint code for this Ford Nimbus Grey is 7/1801C.
Yes, it is compatible with OEM finishes and can be applied over existing acrylic and cellulosic finishes, provided they are in good condition and properly prepared.
After use, invert the can and spray for a few seconds to clear the nozzle. If the nozzle is completely blocked, it may need to be removed and cleaned with a solvent or replaced.
Yes, the paint offers excellent resistance to sunlight and fading.
Ensure the can is held at the correct distance (approx. 15-20cm) and shake the can frequently during use. Check for blockages in the nozzle; if so, remove and clean according to manufacturer instructions or replace the nozzle.
The surface may not have been properly prepared. Ensure it is clean, dry, and free from contaminants. Consider using a primer, especially on plastics or bare metal.
Apply paint in thin, even coats rather than one thick coat. Ensure the can is not held too close to the surface. If drips occur, allow to dry fully and then lightly sand back before re-coating.
Check that the nozzle is not blocked. If recently used, try clearing the nozzle by inverting the can and spraying for a few seconds. Ensure the can is adequately shaken.
Setup:
Compatibility:
Care:
