CASO Design HW 616 Hot Water Dispenser - Black - Silver

The water tank has a capacity of 2.5 liters.

You can select from 7 different temperature settings: 40°C, 50°C, 60°C, 70°C, 80°C, 90°C, and 100°C, plus an ambient (unheated) setting.

It offers four pre-set volumes: 150ml, 200ml, 250ml, and 300ml, as well as a continuous flow mode.

Yes, it is designed to be energy efficient, using up to 50% less energy compared to conventional electric kettles.

The HW 616 dispenses hot water in just a few seconds.

Yes, it includes boil-dry protection and overheating protection.

The frequency of descaling depends on your water hardness. The unit has an integrated reminder for descaling, but it's recommended to descale regularly in hard water areas or as indicated by the reminder.

The product comes with a 2-year guarantee.

Ensure the power cord is securely plugged into a working outlet. Check if the water tank is properly seated.

Verify that the water tank is filled. Ensure the selected volume or continuous flow mode is activated. Check for any visible blockages at the spout.

Confirm that the correct temperature setting has been selected. Allow the unit a moment to reach the target temperature, especially after initial setup or refilling.

Refer to the user manual for specific error code meanings. Common errors relate to boil-dry protection (needs refilling) or overheating. Allow the unit to cool if it's an overheating issue.

Check the water tank for air bubbles or ensure it's not overfilled. Mineral buildup can also affect flow; consider descaling the unit.