Best current price£16.39from eBay
Shopping.co.uk recommended and popular offers
eBay£16.39Visit shop Connect 45� Angled Fuel Line Quick Connectors 11.8 x 10mm 3pc 34235
Visit shop8 offers from £16.39 - £19.46
View price history by clicking the chart icon.
This 3-piece set of Connect 45° Angled Fuel Line Quick Connectors (34235) is designed for automotive professionals and DIY enthusiasts working with fuel systems. The key benefit is a secure, leak-free connection at a specific angle, simplifying installation in tight spaces. A potential caveat is their specific size compatibility, requiring users to verify their fuel line dimensions. These connectors feature a durable nylon PA12 construction, FKM seals for chemical resistance, and meet SAE J2044 standards, ensuring reliable performance under pressure and varying temperatures.
| Model Part Number | 34235 |
|---|---|
| Brand | Connect |
The connectors can handle a constant running pressure of 5 bar (72.5 psi) and a maximum burst pressure of 7 bar (101.5 psi).
They are designed to operate reliably in temperatures ranging from -40°C to 120°C (-40°F to 248°F).
Yes, the FKM seals are compatible with most automotive fuels, including diesel, provided the pressure and size requirements are met.
They are designed for 10mm outer diameter nylon fuel pipes and 12mm inner diameter rubber fuel hoses.
It refers to the angle of the connector body itself, allowing for easier routing of the fuel line in tight spaces compared to a straight connector.
The O-ring seals are made from FKM (Viton), known for its excellent resistance to fuels and high temperatures.
Yes, these connectors are designed for repeated use, provided they are disconnected and reconnected properly without damage.
Verify the fuel line size matches the connector's specification (10mm nylon OD or 12mm rubber ID). Ensure the fuel line end is cut squarely and is free of obstructions or deformation. Check for any damage to the connector's locking tabs.
Disconnect and re-seat the connector, ensuring it clicks into place fully. Inspect the fuel line end for damage or unevenness. Check the FKM O-ring inside the connector for proper seating and absence of damage. Ensure the fuel line material is compatible with the connector.
Press the release tabs firmly and evenly while gently pulling the connector. Ensure the locking tabs are fully depressed. If debris has entered the connector, carefully try to clear it without damaging the internal mechanism.
Setup: Ensure the fuel line ends are clean and free from debris. For nylon pipes, verify they are precisely 10mm in outer diameter. For rubber hoses, confirm an inner diameter of 12mm. Slide the connector onto the fuel line until a distinct click is heard, indicating the locking mechanism has engaged. Always ensure the connection is secure before restoring fuel pressure. The grey tab should face outwards for easy identification.
Compatibility: These connectors are designed for 10mm nylon fuel lines and 12mm inner diameter rubber fuel hoses. They are compatible with most common automotive fuels. Confirm your vehicle's fuel line specifications match these requirements before installation. Not intended for high-pressure diesel return lines or non-fuel applications.
Care: Regularly inspect connectors for signs of wear, cracking, or damage. Clean the exterior with a damp cloth if necessary; avoid harsh solvents. Ensure the locking tabs remain functional. No lubrication is typically required for the internal mechanism.
