Autotek Aerosol Spray Paint - Fluorescent Green - 500ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for users of Autotek Fluorescent Green aerosol spray paint, designed to enhance visibility in low-light environments. The key benefit is greatly improved visibility of potential obstructions and high impact color, ideal for safety applications. Note that optimal results are achieved when applied over a white base. This guide covers key features, usage, and troubleshooting.
All features
| Model Part Number | ATOOFLG500 |
|---|---|
| Brand | Autotek |
Extended Product Information
FAQs
What surfaces can I use this paint on?
This paint is suitable for use on various surfaces. Always test on a small, inconspicuous area first to ensure compatibility.
Do I need to use a primer?
For best results, apply a white base coat before using the fluorescent paint.
How long does it take for the paint to dry?
The paint is fast-drying. Drying times may vary depending on environmental conditions (temperature and humidity).
How should I store the paint?
Store the can in a cool, dry place away from direct sunlight.
Can I use this paint outdoors?
Yes, this paint is suitable for outdoor use. It includes a clear finishing lacquer containing a blend of ultra-violet light absorbers for improved fluorescence protection.
How do I clean the nozzle?
After use, invert the can and spray until only propellant comes out. If the nozzle clogs, clean it with a solvent or replace it.
Troubleshooting
Paint is not spraying evenly.
Clear the nozzle by inverting the can and spraying until clear. If this doesn't work, clean the nozzle with a solvent or replace it.
Paint appears dull or faded.
Ensure you are using a white base coat. Apply additional coats of the fluorescent paint.
Paint is running or dripping.
Apply thinner coats and maintain the correct distance from the surface.
Pros and Cons
Pros
- Improved visibility in low-light conditions.
- High-impact, eye-catching color.
- Fast drying time.
- Designed for safety applications.
Cons
- Requires application over a white base for optimal results.
- Specific to fluorescent green; does not include other colors.
Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and free from loose particles.
- Apply a white base coat for best results.
- Shake the can well before use.
- Hold the can approximately 20-30cm from the surface and apply even coats.
- Apply multiple thin coats for optimal finish and durability.
Compatibility:
- Suitable for use on various surfaces. Always test on an inconspicuous area first.
- Best results are achieved when used in conjunction with a white base coat.
Care:
- Store the can in a cool, dry place away from direct sunlight.
- Clean the nozzle after each use to prevent clogging.
- Use appropriate personal protective equipment (PPE), such as gloves and a mask, during application.