Best current price£21.06from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£21.06Visit shop Skoda Octavia Iii Rs Led Interior Bulb Kit Light 5901414687885
Visit shop1 offer from £21.06
View price history by clicking the chart icon.
The motoLEDy Interior LED bulb kit is designed for Skoda Octavia III RS owners looking to upgrade their cabin lighting to a modern, crisp Xenon White aesthetic. This comprehensive set provides a direct, plug-and-play replacement for factory incandescent bulbs, ensuring full compatibility with the vehicle's dimming system and error-detection electronics. While this kit offers a significant visual improvement, users should be aware that it is intended strictly for off-road use.
| Model Part Number | 158 |
|---|---|
| Brand | motoLEDy |
No, the kit is completely plug-and-play and requires no modifications to the original electrical system.
The bulbs feature a Xenon White color temperature of approximately 5500k.
Yes, these LEDs are fully compatible with the vehicle's interior lighting dimming system, allowing them to fade in and out as factory bulbs do.
This product is designed for off-road use only.
You only need a simple flat-head screwdriver to carefully remove the plastic light housings.
The kit contains 11 bulbs total: 6 for the headliner, 3 for storage/trunk, and 2 for the exterior mirrors.
LEDs are polarity sensitive. Remove the bulb, rotate it 180 degrees, and re-insert it into the socket.
Ensure the bulb is fully seated in the connection. If the error persists, check that the CanBus resistor is not damaged or obstructed.
Verify that the bulb is securely held in the socket clips and that there is no loose wiring behind the housing.
Installing this kit is a straightforward process that does not require specialized electrical knowledge. Using a standard flat-head screwdriver, carefully pry the light housing from the headliner or storage area to expose the factory bulb. Once removed, snap the new motoLEDy bulb into the socket, ensuring correct orientation if necessary for polarity, and click the housing back into place.
