Best current price£1.92from B&Q
Shopping.co.uk recommended and popular offers
B&Q£1.92Visit shop B&Q - Double-Countersunk Yellow-Passivated Steel Wood Screw (Dia)8mm (L)240mmPack Of 1
Visit shop1 offer from £1.92
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and builders needing robust fastening solutions for various projects. The key benefit is the durability and strength offered by these yellow zinc-plated steel screws, ideal for demanding applications. A potential caveat is their specific size, which may not be suitable for all light-duty tasks. These screws are constructed from durable steel with a yellow zinc plating, measuring 8mm in diameter and 240mm in length, featuring a Torx head for enhanced grip and torque transfer.
| Colour | Yellow |
|---|---|
| Brand | Diall |
You will need a Torx (or star) driver bit. The specific size for an 8mm diameter screw is typically a T40 bit.
Yes, the yellow zinc plating provides good corrosion resistance, making them suitable for many outdoor applications like decking or fencing. However, for constant submersion or highly corrosive environments, further protection might be needed.
These screws are primarily designed for wood and softer materials. Using them in metal would require pre-drilling and tapping the metal, or using them with nuts and bolts.
Ensure you are using the correct size Torx bit, that it's fully inserted into the screw head, and apply consistent, firm pressure while driving. Avoid excessive speed on your drill.
A Torx head offers significantly better grip and torque transfer, reducing the likelihood of the driver bit 'camming out' (slipping out of the screw head), which allows for faster and more secure driving, especially with larger screws.
Pre-drilling is highly recommended, especially in hardwoods or when driving screws near the edge of a piece of wood. It prevents splitting and makes driving the screw easier and straighter.
Yellow zinc plating is a common finish applied to steel fasteners to provide a barrier against corrosion. The 'yellow' refers to the chromate conversion coating applied over the zinc, which enhances protection and gives it a distinct yellowish or brassy hue. It offers moderate resistance to rust and wear.
Ensure you are using the correct size Torx bit and that it is fully seated in the screw head. Apply firm, consistent pressure. If the head is already damaged, attempt to use a screw extractor or consider cutting a slot for a flathead screwdriver if possible, though this is challenging with large screws.
Pre-drill a pilot hole, especially in dense wood. Ensure the screw starts at a 90-degree angle to the surface. Use a guide or jig for critical structural connections.
Pre-drill a pilot hole that is slightly smaller than the screw's minor diameter. For very hard woods, a pilot hole close to the screw's major diameter might be necessary. Ensure the screw is not overtightened once seated.
While yellow zinc plating offers corrosion resistance, it is not foolproof, especially in prolonged wet conditions. Clean affected areas with a wire brush and apply a protective coating like wax or a clear sealant suitable for outdoor use. Ensure proper storage in a dry location.
Setup: To use these screws, you will need a Torx driver bit that matches the size of the screw head (typically T40 for this diameter). Ensure the material you are screwing into is suitable for the screw's length and diameter; pre-drilling may be necessary, especially in hardwood, to prevent splitting and ease insertion. Use a drill or impact driver with appropriate torque settings.
Compatibility: These screws are designed for use with wood and other soft materials. They are compatible with standard power drills and impact drivers equipped with the correct Torx bit. The yellow zinc plating is generally compatible with most common building materials.
Care: Store screws in a dry environment to maintain the integrity of the yellow zinc coating. Avoid prolonged exposure to harsh chemicals or highly corrosive environments. If rust spots appear over time, they can often be cleaned with a wire brush and a light coating of oil for protection.
