Picture Hooks - White - Large

These hooks are ideal for very hard surfaces such as cement-faced walls, office partitioning, wood panels, doors, plasterboards, and timber. They are designed to penetrate smooth, hard materials.

The hooks are made of high-tensile nylon and have extra hard pins, suggesting they can hold a reasonable amount of weight. However, the exact weight capacity depends on the wall material and installation. For very heavy items, always ensure a secure fit and consider testing the load.

Generally, firm pressure is sufficient. For harder surfaces, a light tap with a hammer might be needed to help the pins penetrate. A drill is typically not required unless the wall is exceptionally dense.

Grip the hook firmly and pull it straight out from the wall. Some wiggling might be necessary. Be aware that removal might leave small pinholes in the wall.

The product description does not specify outdoor use. For outdoor applications, it is recommended to use hardware specifically designed for weather resistance.

The nylon construction provides higher tensile strength and durability compared to standard plastic hooks, allowing them to withstand more stress and last longer.

Ensure you are using sufficient force. For very hard surfaces, a light tap with a hammer on the hook body may help drive the pins in. Verify the surface is suitable for this type of hook.

The pins may not have penetrated deeply enough or the wall surface might be too soft. Remove the hook and try a slightly different position, applying more pressure. Consider if a different type of wall anchor is needed for the specific wall material.

This can happen if excessive force is applied at an angle or if the wall surface is extremely dense. Ensure you are pushing straight and steadily. If pins consistently bend, the surface may be too hard for this hook, and a drill might be required.