Altrad Belle - Worm Shaft Oil Seal - 5/0052
Best current price£5.49from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£5.49Visit shop Altrad Belle 5/0052 Worm Shaft Oil Seal 15 x 42.6 x 12/14.5 For Minimix 140/150
Visit shopeBay£5.49Visit shop All Offers
2 offers from £5.49 - £8.23
View price history by clicking the chart icon.
eBayAltrad Belle 5/0052 Worm Shaft Oil Seal 15 x 42.6 x 12/14.5 For Minimix 140/150
Free delivery in 1–3 days
£5.49
Visit shop
Worm Shaft Oil Seal (Oct 2004 onwards) for Belle Minimix 150Free delivery in 1–3 days£8.23Visit shop →
Product Information
Full details
This guide is for owners of Altrad Belle Minimix 140/150 mixers who need to replace the worm shaft oil seal (part number 5/0052). This seal is crucial for maintaining the mixer's performance by preventing oil leakage and protecting internal components. Note that this seal is designed for mixers manufactured from October 2004 onwards. It is essential to ensure compatibility before installation.
All features
| Model Part Number | 5/0052 |
|---|---|
| Brand | Altrad Belle |
Extended Product Information
FAQs
What tools do I need for the replacement?
You'll typically need a screwdriver, pliers, a soft mallet or similar tool for seating the seal, and possibly some basic hand tools for disassembly/reassembly.
Where can I purchase the Altrad Belle Worm Shaft Oil Seal (5/0052)?
You can purchase the seal from authorized Altrad Belle dealers, online retailers, or directly from the manufacturer.
How do I check the oil level in my mixer?
Consult your mixer's manual for specific instructions on checking and topping up the oil. Usually, there will be an inspection plug or dipstick.
How often should I replace the oil seal?
The oil seal should be replaced when it shows signs of wear or leakage. Regular inspections will help you identify when replacement is needed.
Can I use a different oil seal?
It is highly recommended to use the original Altrad Belle Worm Shaft Oil Seal (5/0052) to ensure proper fit and performance.
What type of oil should I use in my mixer?
Refer to your mixer's manual for the correct type and viscosity of oil recommended by the manufacturer. Using the wrong oil can damage the mixer.
What do I do with the old oil seal?
Dispose of the old oil seal responsibly. It may be made of materials that are not biodegradable; check your local regulations for proper disposal.
Troubleshooting
Oil leaking from the worm shaft housing after seal replacement.
Ensure the seal is correctly installed and seated. Check for any damage to the shaft or housing. If needed, remove and re-install the seal, applying a thin layer of grease to the seal's outer edge.
Difficulty installing the new oil seal.
Use a suitable tool or a soft mallet to gently tap the seal into place. Ensure the surface is clean and free of any obstructions.
Mixer is making unusual noises after seal replacement.
Check the oil level and ensure all components are properly reassembled. If the noise persists, inspect for any internal damage to the worm shaft or related components.
Pros and Cons
Pros
- Prevents oil leaks, which can damage the mixer.
- Ensures proper lubrication of the worm shaft.
- Extends the lifespan of the mixer.
- Easy to install with basic tools.
- Genuine Altrad Belle part ensuring quality and compatibility.
Cons
- Requires some mechanical aptitude for installation.
- Only compatible with specific Altrad Belle models and manufacturing dates.
- Failure to install correctly can lead to continued oil leakage.
- May require draining the oil from the mixer before replacement.
Setup, Compatibility & Care
Compatibility:
- Ensure that the oil seal (5/0052) is compatible with your Altrad Belle Minimix 140/150 model. Verify the manufacturing date of your mixer; this seal is for models manufactured from October 2004 onwards.
Installation:
- Safety First: Disconnect the mixer from the power source and wear appropriate safety gloves.
- Access: Depending on your mixer's design, you may need to tilt or disassemble part of the mixer to access the worm shaft housing.
- Removal: Carefully remove the old oil seal, taking note of its orientation and position.
- Cleaning: Clean the housing area to remove any debris or old oil.
- Installation: Insert the new oil seal, ensuring it is correctly seated and aligned.
- Reassembly: Reassemble the mixer components.
- Oil Check: Check and top up the oil level if necessary, using the manufacturer's recommended oil type.
Care:
- Regularly inspect the oil seal for any signs of wear or leakage.
- Keep the mixer clean to prevent debris from damaging the seal.