Wessex Electrical LED Push Dimmer Switch - 2 Gang 2 Way - White

This dimmer switch has a maximum total capacity of 400W across both gangs.

It is designed for leading-edge LED dimming compatibility. While it works with many dimmable LEDs, it is best to check the specifications of your LED bulbs and ensure they are compatible with leading-edge dimmers to avoid issues like flickering.

Yes, this dimmer requires a minimum 35mm depth back box to house the dimmer mechanism.

'2-Gang' means the switch has two independent controls (dimmers). '2-Way' means each of these controls can work in conjunction with a standard 2-way switch, allowing you to control the same light from two different locations.

Clean the switch with a soft, dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners.

The minimum load requirement for halogen bulbs is 40W.

Due to the electrical nature of the product, installation by a qualified electrician is strongly recommended to ensure safety and proper function.

Ensure the power supply is connected correctly and the circuit breaker is on. Check that the wiring is secure according to the 2-way switching diagram.

This may indicate incompatibility with the specific LED bulbs used. Verify that the LED bulbs are marked as dimmable and are compatible with leading-edge dimmers. Try a different brand or model of dimmable LED, or consult the bulb manufacturer. Ensure the load is within the 400W limit.

Some warmth is normal, especially under heavy load. If the dimmer becomes excessively hot, turn off the power immediately and check that the total wattage of the connected lights does not exceed the 400W rating. Ensure adequate ventilation around the switch.

Ensure the dimmer mechanism is correctly seated within its housing box and that no wires are obstructing its movement. Check for any debris within the rotary control.