Lindy Serial Printer Cable - 9 Way D Female to 25 Way D Male

This cable connects a PC's standard 9-pin D-sub serial (RS-232) port to a printer's 25-pin D-sub serial port.

This cable is specifically designed for serial printer connections and the type of communication required by printers from brands like Diablo, Epson, and OKI. It may not be suitable for other serial devices like modems or industrial equipment without verifying compatibility.

'9DF' refers to a 9-pin D-sub connector that is Female, and '25DM' refers to a 25-pin D-sub connector that is Male.

The Lindy 2m PC Serial Printer Cable comes with a 10-year warranty.

No, this cable is designed exclusively for older serial printer connections. It is not compatible with modern printers that use USB connections.

Ensure the cable is firmly connected at both ends. Restart your computer and printer. You may need to manually install the specific drivers for your printer model through your operating system's device settings.

Verify both ends of the cable are securely connected. Ensure the printer is powered on and set to use its serial interface. Check Device Manager in your PC's operating system for any errors related to the serial port or printer. Confirm you have the correct printer drivers installed.

Check the serial port settings (baud rate, data bits, parity, stop bits) on both the PC and the printer to ensure they match. A loose connection can also cause this; reseat the cable ends. Try a shorter, known-good cable if available to rule out cable issues.

Inspect the cable for any visible damage to the connectors or wire insulation. Ensure the cable is not being stressed or pulled. If the issue persists, the cable or one of the ports may be faulty.