Setup, Compatibility & Care
Installation Instructions:
- Remove protective film from the edge of the tray where the seal strip will attach (leave it over the base).
- Clean surfaces with a damp cloth, let dry, and wipe with the IPA wipe supplied (if included).
- Cut the strip to the required length, adding at least 20mm extra.
- Peel back 20cm of backing from the adhesive strip.
- Attach the seal so it is square and the edge protrudes at least 20mm above the tray's edge.
- Use a roller or tool to firmly attach the seal and remove bubbles.
- Gradually remove the cover strip, applying the seal firmly to the tray edge.
Compatibility: The MX Flexi Seal is compatible with flat top shower trays and baths.
Care: Clean the seal with a damp cloth. Avoid harsh chemicals or abrasive cleaners.