Rotary Blade and Drive Housing - Cricut

The Cricut Rotary Blade and Drive Housing is designed exclusively for the Cricut Maker machine.

While the Rotary Blade cuts fabric without backing, using a FabricGrip Mat is highly recommended to ensure the fabric stays securely in place during cutting for best results.

Yes, in addition to fabrics, the Rotary Blade is excellent for cutting delicate papers like tissue paper and crepe paper, as well as other soft materials.

Gently use a soft brush to remove any fabric fibers or debris from the blade and housing. Avoid using liquids unless specified by Cricut for specific cleaning solutions.

The lifespan of the blade depends on usage frequency and the types of materials cut. Replace the blade when you notice it becoming dull, snagging materials, or not cutting cleanly.

The Rotary Blade uses a rolling motion to cut fabric, which allows for precise cuts on a wide variety of fabrics and delicate materials without requiring a stabilizer or backing, and without shifting the material.

Ensure the blade is correctly seated in the housing and that the housing is properly clamped in the machine. Check if the blade is dull and needs replacement. Clean any lint or debris from the blade and housing.

Verify that the Rotary Blade and Drive Housing is exclusively for the Cricut Maker. Ensure it is properly inserted into Clamp B and that the machine is powered on. Try re-inserting the housing.

Confirm you are using the correct mat (e.g., FabricGrip Mat recommended for fabrics). Ensure the fabric is adhered securely to the mat. Check if the blade needs replacement as a dull blade can cause snagging.