JRP Riveting Products Dome Head Rivets - 4.8 x 15mm - Grey

Multigrip means these rivets can securely fasten materials across a wider range of combined thicknesses than standard rivets, offering greater flexibility in your project.

For a 4.8mm rivet, you should typically use a 4.8mm drill bit. Ensure the hole is clean and free of burrs for the best result.

Yes, the aluminium and steel construction offers good resistance to corrosion, making them suitable for many outdoor applications. However, for highly corrosive environments, additional protective measures might be considered.

The dome head is a slightly rounded, low-profile head shape that provides a clean appearance and is less likely to snag on objects compared to a countersunk or larger flange head.

Each box contains 500 rivets.

Merlin Grey is a specific shade of grey, designed to be a neutral and professional finish that complements many common metal surfaces.

No, these are standard 4.8mm rivets and will work with most standard rivet guns designed to accommodate that size.

Ensure the rivet gun jaws are clean and functioning correctly. Verify the rivet gun is set for 4.8mm rivets and that the material thickness is within the multigrip range. Check if the pre-drilled hole size is appropriate.

The rivet gun may not be providing enough force. Check the rivet gun's settings or consider a more powerful model. Ensure the rivet is fully seated in the gun before activation.

Confirm that the materials are held tightly together during the riveting process. Check that the correct drill bit size was used for the holes. Ensure the material thickness is within the optimal range for these multigrip rivets.

Handle rivets with care during storage and installation. Use appropriate protective measures on the rivet gun tip if it contacts the surrounding surface. For critical finishes, consider using cover plates or additional protective elements.