Gekko G25 Carpet Spray Adhesive - 3 x 500ml

Achieve a strong, reliable bond with Gekko G25 Carpet Spray Adhesive, the perfect solution for fix...

Best current price£11.99from B&Q

All Offers

2 offers from £11.99

View price history by clicking the chart icon.

B&QB&Q - Gekko Carpet Spray Adhesive 3X500Ml Non-ChlorinatedLow OdourFast Drying Clear Adhesive For Carpets
Free delivery in 1–3 days
£11.99
Visit shop
The RangeUnderfoot Gekko G25 Carpet Spray Adhesive 3X500ml Non-Chlorinated Low Odour Fast Drying. - Clear
Free delivery in 1–3 days
£11.99
Visit shop

Product Information

Full details

The Gekko G25 Carpet Spray Adhesive is designed for both professional floor installers and DIY enthusiasts looking for a reliable, non-chlorinated bonding solution for carpets, underlays, and various floor coverings. Its key benefits include rapid tack and high grab strength, allowing for efficient installation in residential, commercial, and vehicle interior projects. While it offers excellent versatility, users should note that it requires a well-ventilated space for application and careful surface preparation to ensure maximum bond longevity.

All features

Model Part Number1392462
BrandGekko

Extended Product Information

FAQs

Does Gekko G25 dry completely clear?

Yes, Gekko G25 is formulated to dry clear, ensuring it does not leave visible stains on carpet edges.

Can I use this for outdoor carpeting?

Gekko G25 is designed primarily for indoor use. For outdoor applications, check the manufacturer's specific climate-resistant product lines.

How many square meters does a 3-pack cover?

Coverage varies based on the porosity of the surface and the thickness of the application, but typically one 500ml can covers 4-6 square meters.

Is this adhesive toxic?

It is a low-odour formula, but as with all spray adhesives, it must be used in a well-ventilated area to avoid inhaling vapours.

Can I reposition the carpet after applying?

The adhesive is designed for a strong, rapid grab. Repositioning should be done quickly before the adhesive reaches its full tack strength.

Troubleshooting

The nozzle is clogging during use.

Invert the can and spray briefly to clear the valve, or wipe the nozzle tip with a solvent-dampened cloth.

The bond is not holding firmly.

Ensure the surface was free of grease and dust, and verify that you waited for the adhesive to become properly tacky before joining the surfaces.

Pros and Cons

Pros

  • Dries clear for a clean finish
  • Easy to apply with precision spray
  • Fast bonding time saves project hours
  • Safe and effective for indoor use
  • Generous 3-can pack for medium to large jobs

Cons

  • Requires proper ventilation during application
  • Surfaces must be strictly clean and grease-free for proper adhesion
  • Not intended for structural or high-load-bearing repairs

Setup, Compatibility & Care

To ensure the best results, start by preparing your substrate. Use a vacuum or broom to remove dust, debris, and oil. The surfaces must be completely dry before application.

  1. Preparation: Shake the can vigorously before use.
  2. Application: Hold the can 15-20cm from the surface and spray in a consistent motion.
  3. Bonding: Allow the adhesive to become tacky for a few minutes before applying pressure.
  4. Maintenance: After finishing your project, invert the can and spray for two seconds to clear the nozzle and prevent clogging.

Store the cans in a cool, dry place away from direct sunlight and ignition sources. Ensure the room is well-ventilated during and after application until the odour dissipates.

Similar items

Price History

DatePrice
Visit shop