Hycote Stoneguard spray paint provides a durable and protective finish for vehicle surfaces. This ...Hycote Stoneguard spray paint provides a durable and protective finish for vehicle surfaces. This pack includes four 400ml cans, totaling 1600ml of paint, specifically formulated for stone chip protection. The grey finish ensures a professional look and reliable coverage.
4x Hycote Grey Fast Drying Aerosol Spray Paint 400ml XUK475 Car Metal PlasticFree delivery in 1–3 days£23.99Visit shop →
4x Hycote Grey Fast Drying Aerosol Spray Paint 400ml XUK475 Car Metal PlasticFree delivery in 1–3 days£23.99Visit shop →
Product Information
Full details
Hycote Stoneguard Spray Paint is an essential maintenance product for automotive enthusiasts and DIY mechanics looking to protect vehicle underbodies and wheel arches from debris. This 1600ml multipack offers a robust, resilient grey finish specifically formulated to resist stone chips and abrasion, helping to prevent rust and surface damage. While it provides excellent protection, users should be aware that it requires careful surface preparation and controlled application environments to ensure proper adhesion and a smooth, long-lasting finish.
All features
Colour
Grey
Model Part Number
XUK475-PK4
Brand
Hycote
Container Volume
1600ml
Extended Product Information
FAQs
Can I paint over Hycote Stoneguard?
Yes, once fully cured, most automotive topcoats can be applied over the stoneguard layer.
Is this product suitable for the entire car body?
No, it is intended specifically for underbody, wheel arches, and sills; it does not provide a glossy aesthetic suitable for exterior body panels.
Does it prevent existing rust?
It provides a protective barrier, but it is best practice to treat and remove any existing rust before application.
How many cans do I need for a standard car?
For all four wheel arches, a 1600ml pack is usually sufficient for a thorough multi-coat application.
At what temperature should I apply this paint?
For best results, apply in temperatures between 15°C and 25°C.
Troubleshooting
Nozzle clogging during use
Invert the can and spray for a few seconds to clear the valve, or remove the nozzle and soak in solvent.
Paint finish appears uneven or lumpy
Ensure the can is shaken sufficiently and held at the correct distance. Avoid spraying in extreme humidity or cold temperatures.
Poor adhesion to surface
The surface was likely not cleaned well enough. Sand the area lightly and re-apply after degreasing.
Pros and Cons
Pros
Superior impact protection against stone chips
Provides a reliable barrier against rust and moisture
High-volume pack size is cost-effective for large surface areas
Easy-to-use aerosol delivery system
Fast-drying formula for efficient project completion
Cons
Requires thorough surface preparation for best results
Limited to one color option (Grey)
Not intended for use on high-visibility body panels
Requires ventilation during application
Setup, Compatibility & Care
Preparation: Thoroughly clean the target surface using a degreaser to remove dirt, oil, and loose debris. Ensure the area is completely dry before application.
Masking: Use automotive-grade masking tape and paper to cover areas you do not wish to spray, as the product is designed for high adhesion and is difficult to remove once dry.
Application: Shake the canister vigorously for at least two minutes. Maintain a distance of 20-30cm from the surface during spraying.
Curing: Allow sufficient drying time between coats as specified on the canister. Full chemical resistance is typically achieved after 24 hours.
Storage: Keep cans in a cool, dry place away from direct sunlight and store in an upright position.