The Colour It spray paint from Rapide in Grass Green Gloss is perfect for renovating and transform...The Colour It spray paint from Rapide in Grass Green Gloss is perfect for renovating and transforming furniture and other items. This aerosol paint provides a stunning finish and can be applied to various surfaces including Metal, Wood, Plastic, Ceramic, and Glass (with correct preparation). For best results, ensure the surface is clean, dry, and free from loose paint, mould, mildew, wax, or oil. Sanding is recommended for bare wood, and glossy surfaces should be abraded before painting. Cover surrounding areas to protect them from spray mist. The paint covers approximately 2m² per litre. It takes 1 hour to touch dry and 4 hours for recoating. Allow 16 hours for the paint to fully dry. Suitable for both interior and exterior use.
This guide is for anyone looking to refresh or transform furniture and other items with the Rapide GRASS GREEN GLOSS FINISH SPRAY PAINT. The primary benefit is a stunning, durable finish on various surfaces. Keep in mind that proper surface preparation is key for optimal results.
All features
Model Part Number
7138
Brand
Rapide
Extended Product Information
FAQs
What surfaces can I use this spray paint on?
This paint is suitable for Metal, Wood, Plastic, Ceramic, and Glass. Ensure proper surface preparation for optimal results.
How much area does one can cover?
The paint covers approximately 2m² per litre.
How long does it take for the paint to dry?
It is touch dry in 1 hour and recoatable in 4 hours. Allow 16 hours for the paint to fully dry.
Can I use this paint outdoors?
Yes, this paint is suitable for both interior and exterior use.
Do I need to prime the surface before painting?
Priming is recommended for certain surfaces. Check the specific surface requirements for the best results.
How do I clean the painted surface?
Once fully dried, clean the painted surface with a mild detergent and water.
What should I do if the spray nozzle clogs?
Turn the can upside down and spray for a few seconds to clear the nozzle. If the problem persists, try cleaning the nozzle with a pin or needle.
Troubleshooting
Paint is running or dripping.
Apply thinner coats and ensure the can is held the correct distance from the surface. Avoid spraying too much paint in one area.
Paint is not adhering to the surface.
Ensure the surface is properly prepared (clean, dry, and sanded if necessary). Use a primer if needed for difficult surfaces.
Uneven finish.
Shake the can thoroughly before and during use. Apply even coats and maintain a consistent distance from the surface.
Pros and Cons
Pros
Provides a high-quality, glossy finish.
Suitable for a wide variety of surfaces.
Relatively quick drying time.
Easy to apply with aerosol format.
Durable finish suitable for interior and exterior use.
Cons
Requires surface preparation for best results.
Coverage is approximately 2m² per litre.
Full drying time requires 16 hours.
May require multiple coats for desired finish.
Setup, Compatibility & Care
Surface Preparation:
Clean the surface thoroughly, removing any dirt, grease, or old paint.
For bare wood, sand the surface to ensure proper adhesion.
For glossy surfaces, lightly abrade them to create a key for the paint.
Application:
Shake the can well before use.
Hold the can approximately 20-30 cm from the surface.
Apply in even, thin coats.
Allow each coat to dry before applying the next.
Drying Times:
Touch dry: 1 hour
Recoat: 4 hours
Full dry: 16 hours
Care:
Once fully dried, the paint is durable and weather-resistant.
Clean the painted surface with a mild detergent and water.