Best current price£877.20from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£877.20Visit shop Gledhill Stainless Lite Unvented Indirect Cylinder 300 Litres Pluin300.
Visit shop1 offer from £877.20
View price history by clicking the chart icon.
This guide is for homeowners seeking a reliable and efficient hot water solution. The Gledhill Stainless Lite Unvented Cylinder provides mains-pressure hot water, offering a significant upgrade over traditional systems. This direct model, however, relies on electricity and may be less efficient than indirect models if off-peak tariffs are not utilized effectively. This guide covers setup, usage, maintenance, and troubleshooting to help you get the most from your Gledhill cylinder.
| Model Part Number | PLUIN300 |
|---|---|
| Brand | Gledhill |
An unvented cylinder is a sealed hot water storage system that is directly connected to the mains water supply, delivering hot water at mains pressure.
In hard water areas, a water softener can help reduce limescale buildup, which can affect the efficiency of the cylinder. Consult a professional to determine if a water softener is necessary in your area.
It is recommended to have your Gledhill Stainless Lite Unvented Cylinder serviced annually by a qualified engineer.
Ensure the mains water supply is fully open. If the pressure remains low, contact a qualified plumber as it could indicate a problem with the mains supply or the cylinder itself.
No, installation of an unvented cylinder must be carried out by a qualified and certified professional to comply with regulations and ensure safe operation.
Please refer to the manufacturer's documentation for warranty details. Typically, Gledhill products have a comprehensive warranty, often covering several years.
Lift the lever on the P&T valve periodically. Water should discharge when the lever is lifted. If no water comes out, or if the valve leaks continuously, contact a qualified plumber.
Check the electrical supply to the cylinder and the immersion heaters. Check the thermostat settings.
Ensure the mains water supply is fully open. Check for any blockages in the pipework. Consult a plumber.
Check the thermostat setting. Make sure the immersion heaters are functioning correctly.
This indicates a potential overpressure situation. Immediately contact a qualified plumber to inspect and address the issue.
Installation: The Gledhill Stainless Lite Unvented Cylinder must be installed by a qualified professional in accordance with local regulations and the manufacturer's instructions.
Compatibility: This cylinder is compatible with standard UK plumbing systems. Ensure your water supply meets the minimum pressure requirements.
Care:
