Best current price£40.99from eBay
Shopping.co.uk recommended and popular offers
eBay£40.99Visit shop EVOGES Waterproof Electrical Insulating Gel 1000ml– IP68 Re-Enterable 2-Part Gel
Visit shop2 offers from £40.99 - £71.38
View price history by clicking the chart icon.
The Evoges Waterproof Electrical Insulating Sealing Gel is an essential solution for electricians, contractors, and DIY enthusiasts looking to protect outdoor or underground electrical connections from moisture and environmental degradation. By offering an IP68-rated barrier, it ensures long-term reliability for critical wiring, though users should be aware that the 2-part curing process requires careful preparation and mixing before application.
| Model Part Number | AquaSeal 1000 |
|---|---|
| Brand | B&Q |
This product is designed for standard low-voltage electrical insulation. Always check your specific voltage requirements against the product technical data sheet.
Yes, because the gel is re-enterable, it remains soft and can be removed by hand to access the wires if needed.
Curing times depend on ambient temperature; generally, it sets within a few hours, but allow 24 hours for full performance.
No, the gel is a high-quality dielectric insulator and is designed to prevent current leakage.
Yes, keep the containers tightly sealed in a cool, dry place away from direct sunlight.
Yes, its IP68 rating makes it perfectly suitable for protecting underground joints from moisture and soil acidity.
Ensure the ratio of the two components is exact; incorrect mixing ratios often prevent full polymerization.
Pour the mixture slowly into the lowest point of the container to allow the gel to rise and displace air naturally.
Check that all cable entries and seams are properly sealed with electrical tape or cable glands before pouring.
Before application, ensure that all electrical connections are properly tightened and the housing is free of debris. To prepare the gel, combine the two parts in the specified ratio and stir gently to avoid excessive air bubbles. Pour the mixture into the designated container slowly. Once cured, the gel maintains its integrity for years, but it should be kept out of direct contact with chemicals or solvents that might degrade the seal. If you need to re-enter a connection, simply peel back the cured gel; it will return to its stable form once the housing is closed back up.
