Best current price£8.21from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£8.21Visit shop Sealey X1wc Wide Chisel 50 X 400Mm - Sds Max
Visit shop
B&Q£12.42Visit shop - Sealey Wide Chisel 50 X 400mmSds Max X1Wc
Visit shop10 offers from £8.21 - £18.59
View price history by clicking the chart icon.
The Sealey X1WC 50 x 400mm Wide Chisel is an essential tool for masonry professionals and contractors who require high-performance material removal from concrete, brick, and stone surfaces. Featuring an SDS MAX fitting, it is engineered for heavy-duty demolition and surface cleaning tasks, though users should note that the wide 50mm profile is specifically optimized for clearing wide swathes rather than precision cutting.
| Model Part Number | X1WC |
|---|---|
| Brand | Sealey |
No, this is an SDS MAX chisel and is only compatible with SDS MAX-sized chucks.
Yes, you can carefully dress the edge using a grinder, but take care to prevent overheating the metal, which can soften the steel.
While it can handle masonry, it is designed primarily for concrete and brick demolition; excessive use on solid stone may wear the edge prematurely.
No, only lubricate the SDS MAX shank portion. The blade itself should remain clean and dry.
The width allows for faster surface cleaning and wider material removal compared to standard pointed or narrow chisels.
Clean the shank and the internal chuck area of any debris, then apply a thin layer of grease to the shank.
Ensure the chisel is securely locked in the chuck and that the tool angle is consistent with the surface being worked.
Avoid using the tool on metal reinforcement (rebar) or excessively hard materials beyond its design specifications.
To install the chisel, ensure your rotary hammer is set to 'hammer-only' mode (chisel mode) and insert the SDS MAX shank into the chuck until it clicks into the locked position. Verify the bit is secure before turning the tool on. Regarding care, regularly inspect the shank for signs of wear or debris. It is recommended to apply a small amount of heavy-duty grease to the shank before insertion to minimize friction and heat buildup within the tool chuck. After heavy use, wipe down the blade to remove concrete dust and store in a dry environment to prevent surface oxidation.
