Primaflow Prima Classic Compression Elbow - 15mm

The Prima Classic Compression Elbow is suitable for use with copper, brass, and specific plastic pipes that meet the relevant standards for 15mm diameter.

Yes, it is WRAS approved, making it safe for use in potable (drinking) water systems.

Yes, it can be used for gas installations, but always ensure compliance with local regulations and use appropriate jointing compounds if required.

You will need two pipe wrenches to tighten the compression nut securely. A pipe cutter and de-burring tool are also recommended for preparing the pipe ends.

EN 1254 is a European standard that specifies requirements for copper and copper alloy fittings used in plumbing and heating systems, ensuring quality and performance.

A general guide is 3/4 to 1 full turn past finger-tight for 15mm fittings. However, always consult manufacturer guidelines or observe the compression for a secure seal without overtightening.

Warranty information is typically provided by the retailer. Please check the product packaging or contact your point of purchase for specific warranty details.

Ensure the pipe is fully inserted, the ferrule is correctly seated, and the compression nut has been adequately tightened. Check for damage to the pipe or ferrule. Retighten the nut if necessary.

Ensure the pipe and fitting threads are clean and free from debris. Do not force the nut; check for cross-threading or damage to the threads.

Verify that the correct size fitting is used for the pipe diameter. Ensure the pipe is not deformed and the fitting is seated correctly. The pipe surface where the ferrule seals must be smooth and free of scratches.