Best current price£90.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£90.99Visit shop B&Q - Xem001 Sae 85W-140 Heavy Duty Gear Axle Oil Transmission System 1L X6
Visit shop1 offer from £90.99
View price history by clicking the chart icon.
The Carlube Heavy Duty Gear Axle Oil - SAE 85W-140 is designed for professionals and heavy-duty vehicle owners requiring superior wear protection for axles and gears under extreme stress. Its key benefit is preventing bearing failure and offering corrosion protection, ensuring more up-time for equipment. A potential caveat is its specific API GL-5 requirement, meaning it may not be suitable for all vehicle applications. This oil is manufactured by Carlube, a trusted UK-based independent oil blender, and meets or exceeds API and ACEA specifications.
| Model Part Number | XEM001 |
|---|---|
| Brand | Carlube |
Its primary purpose is to provide exceptional wear protection for heavy-duty axles and gears operating under highly stressed conditions, while also preventing bearing failure and offering corrosion protection.
This oil is suitable for applications requiring API GL-5.
This oil is specifically designed for heavy-duty axles and gears. You must check your vehicle's owner's manual to ensure it is compatible with your specific manual transmission, as transmission oil requirements can differ significantly from axle oil.
The frequency of oil changes depends on the equipment manufacturer's recommendations and the operating conditions. Always refer to your owner's manual for the specific service interval.
Heavy duty refers to its suitability for applications that experience extreme pressure, high temperatures, and significant load-bearing stress, such as in commercial vehicles, trucks, and heavy machinery.
Carlube oils are manufactured by the UK's largest independent oil blender.
API GL-5 specifies lubricants that provide extreme pressure (EP) protection, essential for hypoid gears and other high-stress gear sets commonly found in differentials. It offers superior wear protection compared to lower API classifications.
This could indicate worn seals rather than an oil issue. Inspect seals for damage or hardening. If seals are intact, ensure the correct oil viscosity and type are used as per manufacturer recommendations.
Check the oil level first. If the level is correct, unusual noise might indicate gear wear, which the oil aims to prevent but cannot reverse. Ensure the oil meets the required API GL-5 standard.
While this oil is for axles and gears, incorrect gear oil can affect shifting. Confirm this oil is specified for your transmission. If it is, and the problem persists, consult a mechanic.
Compatibility: This oil is specifically formulated for applications requiring API GL-5 specifications. Always consult your vehicle or equipment owner's manual to confirm if SAE 85W-140 and API GL-5 classification are recommended. Using the incorrect oil can lead to damage and void warranties.
Setup: Ensure the vehicle or equipment is safely supported and that the differential or axle housing is clean before draining old oil. Use appropriate tools to remove drain and fill plugs. Fill with the new oil to the level recommended in the manual, typically to the bottom of the fill hole.
Care: Store the oil container in a clean, dry place away from direct sunlight and extreme temperatures. Regularly check fluid levels as part of your vehicle's maintenance schedule. Dispose of used oil responsibly according to local regulations; never pour it down drains or onto the ground.
