Aleene's Super Thick Tacky Glue - 4oz

Yes, Aleene's Super Thick Tacky Glue dries to a clear, permanent finish that will not yellow over time.

Yes, it works well on fabric, especially for applications where you need a strong bond and the fabric is not subjected to frequent washing or heavy wear.

The glue is heat and cold resistant but not specifically waterproof. For items that will be submerged or constantly exposed to moisture, a different type of adhesive may be more suitable.

It grabs on contact, but full curing time can vary depending on the amount applied and the materials used. Allow at least several hours, and preferably 24 hours, for the bond to reach maximum strength.

Yes, this glue provides similar strength to hot glue but without the heat, making it a safer alternative for many projects, especially those involving children or heat-sensitive materials.

It is an all-purpose adhesive that works on most surfaces including paper, fabric, felt, wood, craft foam, and some plastics.

Fresh, wet glue can be cleaned with soap and water before it dries.

Ensure the nozzle is not clogged. Carefully pierce or clear any dried glue with a pin or paperclip. Check if the cap is sealed too tightly, which can sometimes prevent flow.

Ensure the glue is at room temperature. If stored in a cold environment, allow it to warm up. Apply in smaller sections and use a tool like a spatula or craft stick to spread.

Ensure both surfaces are clean, dry, and free from dust or grease. Apply an adequate amount of glue to one surface and press firmly. Allow sufficient drying time for the bond to cure fully.

Apply glue more sparingly. Use a spreading tool for even distribution. For very fine details, consider using a fine-tip applicator if available or decanting a small amount into a separate container.