Best current price£5.69from Blueperry agriculture (UK)
Shopping.co.uk recommended and popular offers
Blueperry agriculture (UK)£5.69Visit shop Blackfriar Danish Oil Clear 250Ml Bf0771001f1
Visit shop
B&Q£10.61Visit shop B&Q - Bf0771001F1 Danish Oil Clear 250Ml Bkfdoc250
Visit shop
The Range£15.67Visit shop Blackfriar Danish Oil, Clear, 500Ml Bkfdoc500
Visit shop32 offers from £5.69 - £34.93
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals seeking a durable, protective finish for interior and exterior wood surfaces. Blackfriar Danish Oil offers a scratch-proof, deep wood penetration for enhanced longevity and aesthetics. A key consideration is that multiple thin coats are required for optimal results, rather than a single application.
| Brand | Blackfriar |
|---|
Multiple thin coats are recommended for best results. Typically, 2-3 coats are sufficient for interior use, while exterior items may benefit from 3-4 coats, ensuring adequate drying time between each.
Drying time can vary based on temperature and humidity. Generally, allow 4-6 hours between coats. The surface should feel dry to the touch.
It is best applied to bare wood. If applying over existing finishes, ensure they are thoroughly sanded back to bare wood or are compatible oil-based finishes. Test in an inconspicuous area first.
Clean spills and marks promptly with a soft, damp cloth. Avoid abrasive cleaners or excessive water.
Yes, it can be used on kitchen worktops, providing a durable and water-resistant finish. However, it will require regular maintenance and reapplication, especially in high-use areas, and prompt cleaning of spills.
Danish oil typically contains a blend of oils and resins, offering a harder, more protective finish than simple oils, along with good penetration. It dries to a more durable, semi-gloss or satin sheen.
This specific product is clear. For tinted finishes, you would need to look for a tinted version of Danish oil or use a compatible wood stain before applying a clear Danish oil.
Ensure the wood was properly prepared (clean, dry, sanded). Apply oil in thin, even coats and always wipe off excess oil thoroughly after penetration time.
More oil needs to be wiped off. Use a cloth with a little mineral spirits to remove the excess tacky residue. Ensure adequate ventilation during drying.
The finish may not be fully cured or enough coats have not been applied. Allow more drying time and consider applying additional thin coats.
This can happen with certain wood types. It is recommended to test on an inconspicuous area first. For future applications, consider using a lighter oil product or preparing the wood differently.
Preparation: Ensure wood surfaces are clean, dry, and free from dust, grease, and old finishes. Lightly sand any rough patches with fine-grit sandpaper and wipe away dust.
Application: Apply the first coat thinly using a brush, lint-free cloth, or spray. Allow it to penetrate for 15-30 minutes, then wipe off any excess oil that has not been absorbed. Apply subsequent coats in the same manner, allowing adequate drying time between each layer (typically 4-6 hours, depending on conditions). Multiple thin coats are recommended over one thick coat for optimal durability and scratch resistance.
Compatibility: Suitable for all types of bare wood, including hardwoods and softwoods, for both interior and exterior applications. It can also be used over existing stains or oils, provided they are compatible.
Care: Clean with a soft, damp cloth. Avoid harsh chemical cleaners. For sustained protection, reapply a thin coat of oil annually or as needed, especially for exterior items.
