Howard Feed-N-Wax Wood Polish & Conditioner - 140ml - FW0004
Feed-N-Wax Wood Polish & Conditioner is ideal for enhancing the natural depth of grain while provi...Feed-N-Wax Wood Polish & Conditioner is ideal for enhancing the natural depth of grain while providing added protection and luster to furniture, antiques, and cabinets. Feed-N-Wax helps introduce conditioning oils that “feed” the wood while providing a protective coating of beeswax and carnauba wax. This unique blend of beeswax, carnauba wax, orange oil, and other beneficial ingredients help preserve and keep the wood from drying out, fading, or even cracking. Protect your wooden furniture with this nifty Howard Feed-N-Wax Wood Polish & Conditioner. Feed N Wax Polishes all wood surfaces to a soft luster with a protective coating of Carnauba Wax and Beeswax. Moisturizes And Protects With A Coating Of Natural Wax. Enhances the natural beauty and depth of grain in finished and unfinished wood. Prevents Drying And Cracking of All Wood Finishes. Enhances the Natural Beauty and Depth Of Grain.
Howard Feed N Wax Wood Polish and Conditioner, 140 ml (Pack of 1), YellowFree delivery in 1–3 days£14.75Visit shop →
Product Information
Full details
This guide is for anyone looking to maintain and protect their wooden furniture, antiques, and cabinets using Howard Feed-N-Wax Wood Polish & Conditioner. It enhances the natural beauty of wood while providing a protective coating. Note that this product is best suited for finished and unfinished wood surfaces and may not be ideal for all types of wood finishes.
All features
Model Part Number
FW0004
Brand
howard products
Extended Product Information
FAQs
How often should I apply Feed-N-Wax?
Apply Feed-N-Wax every few months or as needed to maintain the luster and protect the wood.
Can I use Feed-N-Wax on all types of wood?
It is suitable for most finished and unfinished wood surfaces. Always test in an inconspicuous area first.
What is the shelf life of Feed-N-Wax?
The product has a long shelf life when stored properly in a cool, dry place.
How do I remove excess product?
Wipe away excess product with a clean, soft cloth and buff the surface.
Is it safe to use on food contact surfaces?
While the product is made with natural ingredients, it is not recommended for direct contact with food.
What if the wood feels sticky after application?
You likely used too much product. Wipe away the excess with a clean cloth and buff the surface until the stickiness is gone.
Troubleshooting
Streaking or uneven finish after application.
Use a clean, soft cloth and buff the surface more thoroughly. Apply the product more sparingly in the future.
Cloudy appearance.
Too much product was applied. Wipe away excess product with a clean cloth and buff the surface.
Product not absorbing into the wood.
Ensure the wood surface is clean before application. Try using less product.
Pros and Cons
Pros
Enhances wood grain and appearance.
Provides a protective wax coating.
Prevents drying and cracking.
Easy to apply.
Suitable for various wood types.
Cons
May not be suitable for all wood finishes.
Requires periodic reapplication.
Can leave a slightly waxy residue if over-applied.
Effectiveness depends on proper application.
Setup, Compatibility & Care
Setup
Clean the wood surface with a suitable wood cleaner.
Apply a small amount of Feed-N-Wax to a soft cloth.
Rub the cloth onto the wood surface in a circular motion.
Allow the product to penetrate the wood.
Buff with a clean cloth to a soft luster.
Compatibility
Compatible with finished and unfinished wood.
Test in an inconspicuous area before applying to the entire surface.
Care
Reapply as needed, typically every few months or as the wood begins to look dull.