Best current price£2.50from eBay
Shopping.co.uk recommended and popular offers
eBay£2.50Visit shop Etronix Female XT90 Bridging Adaptor w/ 10G Wire ET0857 XT-90 RC Plug connector
Visit shop4 offers from £2.50 - £5.60
View price history by clicking the chart icon.
The Etronix Female XT90 Bridging Adaptor with 10G Wire (ET0857) is designed for hobbyists needing a reliable connection for power transfer, particularly in radio control models, Scalextric, and Hornby setups. Its key benefit is providing a robust XT90 connection with pre-attached 10G wire for ease of use. A potential caveat is its specific connector type, requiring compatible XT90 components.
| Model Part Number | ET0857 |
|---|---|
| Brand | Etronix |
The adaptor comes with 10-gauge (10G) wire, which is suitable for handling high current loads common in hobby applications.
While it facilitates power transfer, it's primarily designed as a bridging adaptor for direct component connection. For charging, ensure your charger and battery system are compatible with an XT90 connection and that this adaptor is used appropriately within that setup.
Yes, this adaptor uses the standard XT90 connector size, ensuring compatibility with other XT90 male connectors.
It is ideal for radio control models (cars, boats, planes), Scalextric and Hornby electric racing sets, and other hobby projects requiring a secure, high-current power connection.
The adaptor comes with the 10G wire pre-attached to the XT90 female connector. You will need to connect the other end of the wire to your desired component or power distribution system, which may involve soldering or using crimp connectors.
XT90 connectors are designed for high-current applications, offering a secure, low-resistance connection that is less prone to melting or failure compared to smaller connectors when handling significant power.
Verify that the XT90 connectors are fully seated and correctly polarized. Check the integrity of the wire connections to the receiving end and ensure the power source is active and functional.
Inspect the XT90 connection for any debris or corrosion. Ensure the wire connections are secure and that the components being powered are not exceeding the current rating of the adaptor's wire.
Gently check for any damage to the XT90 housing or internal contacts. If damaged, replacement may be necessary. Ensure the male XT90 connector being used is standard and not oversized.
Setup: To use the Etronix Female XT90 Bridging Adaptor, connect the XT90 female end to the male XT90 component (e.g., battery, ESC). The pre-attached 10G wire should then be connected to the corresponding power input or distribution point, typically via soldering or appropriate crimp connectors, ensuring correct polarity.
Compatibility: This adaptor is specifically designed for components featuring XT90 male connectors. It is widely compatible with radio control vehicles, drones, electric scooters, and other hobby projects that utilize XT90 power connectors. Ensure that the connected devices also support the current capacity of the XT90 connector and the 10G wire.
Care: Keep the adaptor clean and free from debris. Avoid exposing it to excessive moisture or extreme temperatures. Periodically inspect the connector and wire for any signs of damage or wear. Cleaning can be done with a dry or slightly damp cloth; ensure the adaptor is completely dry before use.
