WAGO 2001-404 4 Way Insulated Push-in Jumper Bar - 2001 Series - Light grey

The Wago 2001-404 is an insulated jumper bar used to create connections between multiple adjacent Wago 2001 Series through terminals, effectively bridging conductors.

It is designed exclusively for use with Wago 2001 Series through terminals.

The Wago 2001-404 has a maximum current rating of 18 Amperes (18A).

No, this jumper bar is specifically engineered for the Wago 2001 Series and will not be compatible with other Wago terminal series.

No, the push-in design of the jumper bar and the compatible terminals allows for tool-free installation and removal.

The jumper bar measures approximately 18.9mm in height, 4.1mm in depth, and 15.5mm in width.

The voltage rating for this jumper bar is 800 Volts (800V).

Ensure the jumper bar is fully seated in the terminal block's jumper slots. Verify that you are using compatible Wago 2001 Series terminals and that the conductors are properly stripped and inserted into the terminal.

Check that all conductors are fully inserted into their respective terminals and that the jumper bar is making solid contact. Inspect for any physical damage to the jumper bar or terminal blocks.

Verify that the connected conductors are within the specified gauge range for the 18A rating. Ensure the total current draw does not exceed the jumper bar's capacity. Check for loose connections or damaged conductors.