Best current price£43.72from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£43.72Visit shop Floplast Anthracite/Grey Ring Seal Soil Pipe Single Socket - 110Mm X 3Mtr - Pack Of 2
Visit shop
B&Q£73.62Visit shop B&Q - Ring Seal Soil Pipe Single Socket 110mm X 3M Anthracite GreyPack Of 2
Visit shop2 offers from £43.72 - £73.62
View price history by clicking the chart icon.
The FloPlast 110mm Ring Seal Soil Pipe is an essential solution for homeowners, contractors, and DIYers managing above-ground foul drainage in bathrooms, kitchens, and utility rooms. Its primary benefit is the push-fit connection system, which allows for rapid, secure installation without the need for complex adhesives or welding, though users should be mindful that proper lubrication and thermal expansion spacing are critical for long-term joint integrity.
| Model Part Number | SP3AG2PACK |
|---|---|
| Brand | FloPlast |
No, this is specifically designed for above-ground soil and vent systems. Use designated underground drainage pipe for buried applications.
While it is designed for a ring seal (push-fit) connection, it can often be adapted, but it is not intended to be solvent welded directly.
The small gap allows the pipe to expand and contract due to temperature changes without putting stress on the joints.
No, this system relies on the internal rubber ring seal for water tightness, so glue or adhesive is not required.
The anthracite grey finish is intended to be a final finish; however, if painting is required, ensure you use a plastic-specific primer.
A fine-toothed hand saw or a dedicated plastic pipe cutter should be used to ensure a clean, straight edge.
Ensure the pipe end is properly chamfered and that sufficient silicone lubricant has been applied to both the spigot and the seal.
Remove the pipe, inspect the ring seal for debris or damage, clean the area, re-lubricate, and re-insert carefully.
Check that the pipe is supported by the correct number of pipe clips, spaced according to manufacturer guidelines to prevent deflection.
To install, first ensure the pipe is cut square and the end is chamfered—removing any burrs with a file is essential to avoid damaging the ring seal during insertion. Apply a light coating of silicone lubricant to the spigot end. Push the pipe squarely into the socket until it bottoms out, then pull it back approximately 10mm to allow for thermal expansion.
This pipe is compatible with most standard 110mm push-fit soil systems. For maintenance, keep the pipe exterior clean with mild soap and water; avoid abrasive chemicals or paint that might compromise the material. Periodically inspect joints for any signs of seepage if the system is subjected to high vibration or movement.
FloPlast Ring Seal Soil Pipe Single Socket - 110mm x 3mtr Grey - Pack of 2From £44
Viva 90deg Flexible Pan Connector - White PolypropyleneFrom £19
FloPlast Ring Seal Soil Pipe Single Socket - 110mm x 3m - Anthracite GreyFrom £24
Wavin OsmaSoil S/S boss adaptor - 40mm - greyFrom £7
FloPlast Soil Pipe - 110mm x 3mtr - WhiteFrom £24
Hep2O Straight Connector - White - 10mmFrom £6
FloPlast Air Admittance Valve - 40mm - WhiteFrom £10
Hep2O Keyless Straight Connector - 10mmFrom £5
Fluidmaster Pan Connector 300-600mm - MPN: 620 35 212From £27
McAlpine Straight Pan Connector - WC-CON1VFrom £16
McAlpine Boss Connector - BOSSCONN-22MMFrom £15
FloPlast Push Fit Waste 90 Degree Knuckle - 50mmFrom £5