Loops 2 Gang Double DP 13A Switched UK Plug Socket - Screwless Matt White Power - Pack of 2

A double pole switch disconnects both the live and neutral conductors of a circuit when switched off, providing a higher level of safety compared to single pole switches which only disconnect the live conductor.

If you are comfortable and experienced with electrical wiring, and adhere to all safety regulations, you may install them yourself. However, for safety and compliance, it is always recommended to use a qualified electrician for any electrical installations.

These sockets are designed to fit a standard UK double-gang backbox, which can be either recessed into the wall or a surface-mounted type.

No, these sockets are designed for indoor use only and are not weatherproof.

Each socket is rated at 13A. To calculate the maximum wattage, multiply the amperage by the voltage (e.g., 13A x 240V = 3120W). However, always consider the total load on the circuit.

Use a soft, dry cloth for dusting. For more stubborn marks, use a slightly damp cloth and wipe dry immediately. Avoid harsh chemicals or abrasive materials.

Verify that the power has been restored at the mains. Double-check all wiring connections against the correct wiring diagram for double pole sockets. Ensure the circuit breaker has not tripped.

Ensure the socket is correctly seated in the backbox. If the issue persists, it may indicate a fault with the internal switch mechanism. Contact the retailer or manufacturer.

Check that the backbox is installed correctly and level. Ensure no wires or debris are obstructing the faceplate. Gently apply even pressure across the faceplate to engage the clips.