Best current price£24.26from eBay
Shopping.co.uk recommended and popular offers
eBay£24.26Visit shop Laser Tools Engineered Acetyl Jack Pad for Tesla Model S & X - 1pc 8461
Visit shop7 offers from £24.26 - £24.56
View price history by clicking the chart icon.
This guide is for Tesla Model S and X owners who need to safely lift their vehicles. The Laser Tools Jack Pad (8461) provides a secure and non-damaging interface between your jack and the vehicle's lifting points, preventing harm to the battery and chassis. A key caveat is that these pads are designed for temporary use and must be removed after lifting.
| Model Part Number | 8461 |
|---|---|
| Brand | Laser |
This specific jack pad, Laser Part No. 8461, is designed for Tesla Model S and Model X vehicles.
No, the jack pads are not intended for permanent installation and should be removed after use.
The jack pad is suitable for use with a trolley jack that has a lift pad of at least 70mm (2 3/4").
It is manufactured from non-compressible and non-marring Acetal plastic with a rubber O-ring.
Laser Part No. 8461 is for a single jack pad. A 4-piece set is available under Laser Part No. 8440. For Model 3 and Y, see Laser Part Nos. 8460 (1pc) or 8439 (4pc).
Clean the jack pad with a damp cloth after each use and store it in a dry place.
Using a jack with a lift pad smaller than 70mm may result in an unstable connection and potential damage to the jack pad or the vehicle's jacking point.
Verify you are using the correct pad for your Tesla model (8461 for Model S/X) and ensure it is aligned with the vehicle's jacking point. Check if the jack's lift pad is compatible (min. 70mm).
Ensure the jack pad is fully inserted into the jacking point and the trolley jack is centered directly beneath it. Check that the vehicle is on a level surface and the jack is stable.
Gently twist and pull the pad. Ensure no debris is trapped between the pad and the jacking point. Avoid using excessive force that could damage the pad or vehicle.
Setup:
Compatibility:
Care:
