Stick On Kitchen Backsplash Tiles - 10-Sheet, White Marble Design, 12"x12"

Each package contains 10 sheets of 12"x12" tiles, covering approximately 8.2 square feet with overlap.

Yes, they can typically be removed by gently heating the adhesive with a hairdryer on a low setting and slowly peeling the tile away. However, results may vary depending on the original wall surface and how long the tiles have been applied.

While the tiles are heat-resistant, it is recommended to maintain a safe clearance between the tiles and direct heat sources like open flames, as per your stove manufacturer's guidelines.

Installation is only recommended over smooth, clean, and non-porous surfaces. Avoid installing over textured, uneven, or grout lines, as this will compromise adhesion and the final appearance.

Clean using a soft, damp cloth. Mild soap can be used for tougher grime, but avoid abrasive cleaners.

The tiles have a gel-like texture and are designed to provide a 3D effect. Specific thickness is not provided, but they are generally thin enough for easy cutting and application.

The tiles are moisture-resistant and suitable for bathroom backsplashes. For areas with direct, prolonged water exposure (like inside a shower stall), test adhesion in a small area first, as constant saturation may affect longevity.

Ensure the surface is perfectly clean, dry, and smooth. Reheat the adhesive gently with a hairdryer on a low setting and press firmly.

Gently peel back the affected tile and reapply, smoothing from the center outwards. For small bubbles, you may be able to prick them with a fine needle and press flat.

Use a sharp utility knife or craft knife and a metal ruler for straight cuts. Score the line multiple times rather than trying to cut through in one go.

Ensure tiles are aligned precisely before pressing down. For very minor gaps, consider touch-up paint along the edge of the substrate if applicable, or re-align the next tile for better overlap.