Best current price£175.00from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£175.00Visit shop Festo Compact Cylinder 40Mm Bore 80Mm Stroke Iso 21287 Double Acting - 554257
Visit shop1 offer from £175.00
View price history by clicking the chart icon.
The Festo Compact Cylinder ADNGF-40-80-P-A is designed for automation engineers and industrial maintenance professionals seeking high-force, space-efficient linear motion. Featuring a 40 mm bore and 80 mm stroke, it excels in applications requiring precise guidance and non-rotating movement. While its compact footprint is ideal for tight spaces, users should note that the integrated guide rods require consistent lubrication to maintain optimal performance in high-cycle environments.
| Model Part Number | ADNGF-40-80-P-A |
|---|---|
| Brand | Festo |
This model has a 40 mm piston diameter (bore) and an 80 mm stroke length.
Yes, the integrated guide rods and yoke plate provide high resistance to torque and prevent the piston rod from rotating.
Yes, it contains a magnetic piston designed to work with standard Festo proximity sensors.
It uses elastic cushioning rings at both ends, denoted by the 'P' in the part number.
At a standard operating pressure of 6 bar, it delivers a theoretical force of 754 N during the advance stroke.
Yes, it is built to ISO 21287 standards, ensuring compatibility with standard mounting footprints.
Check air supply for leaks and verify input pressure is consistently at 6 bar.
Ensure the sensor is correctly aligned with the magnetic piston and the cable connection is secure.
Inspect guide rods for debris or lack of lubrication; verify air lines are not kinked.
To install, mount the cylinder using the through-holes on the end caps, ensuring the mounting surface is flat to avoid mechanical stress on the guide rods. For position monitoring, slide a proximity sensor into the integrated slot along the cylinder barrel and tighten the mounting screw once the desired end-of-stroke position is reached.
Maintenance is straightforward: monitor the guide rods for dust or debris accumulation, as contaminants can degrade the seals over time. Wipe the guide rods clean with a lint-free cloth periodically and apply a thin film of grease if the application environment is dry. Ensure that your pneumatic system uses filtered, lubricated air (where applicable) to extend the life of the internal seals.
