Multi Material Drill Bit - Tungsten Carbide - J&Y

This multi-material drill bit is designed for use on tile, brick, wood, cement, PVC, and similar materials.

No, water is not needed for most materials. Dry drilling is suitable for a wide range of applications.

Select the drill bit size based on the diameter of the hole you need to create. The available sizes are 6mm, 8mm, 10mm, and 12mm.

This bit is primarily designed for masonry, wood, and plastic. It is not optimized for drilling through most metals.

The tip is made of strong and durable tungsten carbide.

Each listing or order is for one drill bit.

Yes, this drill bit is compatible with standard rotary drills that have a chuck capable of gripping the bit shank securely.

The sharp tip reduces slipping, improves accuracy, and helps create a cleaner entry point into the material.

Ensure you are using the correct drill speed and applying sufficient, consistent pressure. Check if the material is beyond the bit's capabilities or if the bit is dull. If drilling into harder materials like concrete, a hammer drill function may be beneficial.

Make sure you have marked your drilling point accurately. Start drilling at a slow speed to create a pilot indentation, then increase speed. Ensure the drill bit tip is sharp and undamaged.

Reduce drilling speed and the amount of pressure applied. Allow the bit to cool down periodically, especially when drilling into dense materials. For most materials, water is not required, but for continuous drilling in very hard materials, a small amount of water can help.

Ensure you are not exceeding the recommended usage for the material. Avoid forcing the bit, especially into extremely hard substances. Use the correct drill speed for the material type. For exceptionally hard materials, consider specialized drill bits.