Excel Desktop Bench Table Mountable PDU - Silver

The exact maximum thickness depends on the specific design of the supplied clamps. Please refer to the clamp's specifications or test fit to ensure a secure attachment.

You will need a power cord with a connector compatible with the PDU's input (typically a C13 connector) and a standard mains plug for your region. These are sold separately and available in various lengths.

No, this PDU is designed for desktop mounting using clamps and is not intended for permanent installation.

The PDU has 2 x 6c apertures, meaning you can plug up to two multi-way adapters into it, which can then power multiple devices. However, always ensure the total power draw does not exceed the PDU's capacity or the circuit's limit.

Warranty information is typically provided by the retailer at the point of sale or can be found in the product manual. Please check your purchase documentation.

The anodised finish provides good durability, but like most metallic surfaces, it can be susceptible to deep scratches if subjected to significant abrasion. Gentle cleaning and careful use are recommended.

Ensure the power cord is securely plugged into both the PDU and the wall socket. Check if the illuminated master switch is in the 'on' position. Verify the wall socket is functional.

Check that the master power switch is illuminated and in the 'on' position. Ensure each device's plug is fully inserted into the PDU aperture. Test the PDU with a different set of known working devices.

Confirm the desk edge thickness is within the range supported by the clamps. Ensure the clamps are correctly aligned and tightened sufficiently. Clean any debris from the clamp contact points and the desk edge.

While the unit may still function, an unlit switch might indicate an internal issue. Ensure the power cord is correctly connected and the master switch is engaged. If the issue persists, contact support.