Best current price£25.00from Team Cycles
Shopping.co.uk recommended and popular offers
Team Cycles£25.00Visit shop Swissstop Unisex Black Disc 32 Exotherm 2 For Sram Road
Visit shop3 offers from £25.00 - £48.00
View price history by clicking the chart icon.
The Swissstop Disc 32 EXOTherm2 brake pads are designed for cyclists seeking maximum pad life and minimal brake fade, particularly those using compatible SRAM hydraulic disc brake systems. Their key benefit is superior pad wear rates and consistent, powerful braking even under demanding conditions. A potential caveat is their specific compatibility, requiring careful checking against your brake system. These pads feature a durable compound and a cooling fin equipped back plate to ensure reliable performance.
| Series | ExoTherm 2 |
|---|---|
| Model Part Number | P100005316 |
| Brand | Swissstop |
No, the Disc 32 EXOTherm2 pads are specifically designed for the SRAM hydraulic road and some MTB models listed in the compatibility section. They are not compatible with SRAM G2 or Guide series calipers.
Visually inspect the brake pad material. If the pad material is worn down to approximately 1mm or less, or if you notice a significant decrease in braking performance, it's time for a replacement.
The cooling fins on the back plate help to dissipate heat away from the rotor and caliper more effectively. This reduces the operating temperature of the braking system, which in turn minimizes brake fade during prolonged or heavy braking.
Yes, the EXOTherm2 compound is designed to provide consistent performance in a variety of conditions, including wet weather. However, as with all disc brakes, expect reduced performance immediately after initial contact with water, which will improve as the rotor clears.
No, these pads are designed to work with standard bicycle disc brake rotors. Ensure your rotors are clean, true, and compatible with your brake system.
EXOTherm2 is specifically formulated for maximum pad life and minimal fade, featuring cooling fins for enhanced heat management. Other compounds may prioritize different characteristics like initial bite or modulation.
Perform a thorough brake bed-in procedure. Ensure the rotors are clean and free from contamination. Double-check that the pads are correctly installed and seated.
This can sometimes occur with disc brake pads. Ensure rotors are clean. Check pad alignment within the caliper. Sometimes, repeated firm braking can help seat the pads and reduce noise.
Verify that the correct pads for your brake model are installed. Ensure rotors are straight and clean. Check for any debris caught between the pad and rotor.
Ensure the cooling fins are not obstructed by dirt or debris. Clean the rotors and pads. If fade persists, consider if the brake system itself is adequate for the conditions, or if a more aggressive compound is needed (though EXOTherm2 is designed to minimize fade).
Compatibility:
These pads are designed for specific SRAM hydraulic disc brake calipers. Please verify your brake model against the following list before purchasing:
Setup:
Care:
