Best current price£118.39from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£118.39Visit shop Freefoam Dark/Grey 225Mm Smooth Fascia Capping Board - 10Mm X 5Mtr - Pack Of 2
Visit shop2 offers from £118.39
View price history by clicking the chart icon.
The Freefoam 225mm Dark Grey Fascia Capping Board is ideal for professional contractors and DIY enthusiasts looking to modernize or protect roofline perimeters with a sleek, low-maintenance finish. Its primary benefit is the combination of aesthetic appeal and long-term durability provided by the 10mm thick bottom lip, making it a reliable foundation for rainwater systems; however, users should note that it requires installation over a structurally sound backing board or existing timber, as it is designed for capping rather than as a standalone load-bearing fascia.
| Model Part Number | FW225DGPACK2 |
|---|---|
| Brand | Freefoam |
No, these boards are designed to be installed over a sound timber backing board to provide a secure fixing point.
Use high-quality stainless steel polytop nails that match the dark grey color of the boards.
Yes, Freefoam boards are manufactured to be color-fast and resistant to UV degradation.
Use an appropriate fascia joint cover or a connector designed for 225mm boards to ensure a neat, weather-tight finish.
The product is certified to BS EN 13245-2:2008 standards.
While intended for exterior rooflines, the material is technically a PVC profile; however, it is specifically optimized for exterior weather exposure.
This often occurs due to over-tightening nails or spacing them too far apart. Ensure nails are fixed at recommended 600mm centers and leave room for natural thermal expansion.
Use a fine-tooth saw to prevent chipping the edge of the board. Support the board fully along its length during the cutting process.
To install, ensure the existing timber is rot-free and dry. If the existing wood is damaged, it must be repaired or replaced before the capping board is applied. Use 50mm or 65mm stainless steel polytop nails, spacing them at maximum 600mm centers to prevent warping. For cleaning, simply wipe the surface with a damp cloth and a mild soap solution. Avoid using abrasive sponges or solvent-based cleaners, as these can dull the dark grey finish and scratch the surface of the PVC.
