Fit For The Job Foam Paint Brush Set - 3 Piece

These brushes are suitable for water-based and oil-based paints, stains, varnishes, and other finishes compatible with foam applicators.

Clean brushes with appropriate solvents or water, depending on the coating used. Rinse until clean and reshape the brush head.

While these brushes can be used on various surfaces, they work best on smoother surfaces. Rough surfaces may cause the foam to wear down more quickly.

Store the brushes in a clean, dry place after they are completely dry, avoiding bending or crushing the foam heads.

The 1" brush is ideal for detail work, the 2" brush is suitable for medium-sized areas and furniture, and the 3" brush is best for larger surfaces like trim or small walls.

Load the brush with an appropriate amount of paint and wipe off excess paint on the edge of the container before applying it to the surface. Apply paint with even strokes to prevent drips.

Ensure the brush is loaded evenly with paint and apply in smooth, consistent strokes. Avoid overworking the paint.

Make sure the surface is clean and primed if necessary. Check the paint consistency and thin if needed, following the paint manufacturer's instructions.

Ensure you are using the correct type of paint, coatings and solvents for the brush type. Avoid excessive pressure during application and proper cleaning and storage.