Shopping.co.uk

Primaflow Copper Solder Ring Elbow 90' 12mm

Primaflow Copper Solder Ring Elbow 90' 12mm

PrimaPlus Solder Ring fittings are a premium copper fitting with integrated solder, saving time as...

Best current price£3.32from The Range

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
The Range£3.32Visit shop

Prima Plus Solder Ring Elbow 90' 12Mm - 32524709 - Premium Copper Fitting - Grey

Visit shop

All Offers

2 offers from £3.32 - £3.52

View price history by clicking the chart icon.

The RangePrima Plus Solder Ring Elbow 90' 12Mm - 32524709 - Premium Copper Fitting - Grey
Free delivery in 1–3 days
£3.32
Visit shop
OnBuy.comCopper Solder Ring 90 Elbow 12Mm 5051258003201
Free delivery in 1–3 days
£3.52
Visit shop

Product Information

Full details

This guide is for plumbers and DIY enthusiasts working on water or gas installations. The Primaflow Copper Solder Ring Elbow 90' 12mm offers a time-saving, integrated solder solution for creating 90-degree bends in pipework. While its ease of use is a significant advantage, users should be aware of the specific preparation required for solder ring fittings.

All features

Model Part NumberCopperSolderRing90Elbow-12mm
BrandPrimaflow

Extended Product Information

FAQs

Do I need to use flux with these fittings?

No, the solder ring fittings have integrated solder, so no additional flux or solder is required.

What is the main advantage of solder ring fittings?

The primary advantage is the speed and simplicity of installation, as the solder is pre-applied within the fitting.

Are these fittings safe for drinking water?

Yes, they are WRAS approved, which means they are certified for use with potable (drinking) water systems.

What pipe sizes are these fittings compatible with?

This specific fitting is for 12mm copper pipe.

Can I use these for gas pipes?

Yes, these fittings are suitable for gas installations, provided they are used in accordance with all relevant gas safety regulations.

What is the standard the fitting is manufactured to?

They are manufactured to EN 1254 standard and meet British Standards (BS Standard).

How do I ensure a good joint?

Ensure the pipe and fitting are clean, fully inserted, and that heat is applied evenly to the fitting body to melt the integrated solder.

Troubleshooting

Fitting does not seal / leak occurs

Ensure pipe and fitting were thoroughly cleaned before heating. Check that sufficient heat was applied evenly to the fitting body to melt the solder ring completely. Verify the pipe was fully inserted before heating.

Solder does not flow into the joint

The fitting may not have reached the correct temperature. Apply heat more consistently and for a slightly longer duration, ensuring the heat is distributed around the fitting body. Clean the pipe end and fitting interior again.

Discoloration on the fitting

Some discoloration is normal due to heating. If the discoloration is excessive or indicates overheating, the joint may be compromised and should be redone. Ensure the torch flame is not directly held on one spot for too long.

Pros and Cons

Pros

  • Significantly reduces installation time due to integrated solder.
  • High-quality copper construction ensures longevity.
  • WRAS approval confirms suitability for drinking water.
  • Meets rigorous British Standards (BS Standard) for safety and reliability.
  • Versatile for both water and gas applications.

Cons

  • Requires careful cleaning and preparation of the pipe end.
  • Specific heat application is crucial for proper solder flow.
  • May be less forgiving for beginners compared to compression fittings.
  • Not suitable for lead or plastic pipe systems without appropriate adaptors.

Setup, Compatibility & Care

Setup:

  1. Ensure the pipe end and the inside of the fitting are clean and free from grease or debris.
  2. Insert the pipe fully into the fitting.
  3. Apply heat evenly to the fitting body (not directly to the solder seam) using a propane torch. Use a consistent sweeping motion.
  4. Once the fitting reaches the correct temperature, the integrated solder will melt and flow into the gap between the pipe and fitting, creating a watertight and gas-tight seal.
  5. Allow the joint to cool undisturbed for several minutes before applying pressure.

Compatibility:

  • Compatible with copper pipes manufactured to BS EN 1057 standards.
  • Suitable for water (potable and non-potable) and low-pressure gas installations (refer to relevant gas regulations).
  • Not directly compatible with plastic pipes; use appropriate copper-to-plastic transition fittings if necessary.

Care:

  • These fittings are designed for permanent installation and do not require regular maintenance. Ensure the surrounding area is kept clean.

Price History

DatePrice
Visit shop