Heavy Cut Compound 400 - menzerna - 400

Its primary benefit is its all-in-one capability, acting as a heavy cut compound, medium cut polish, and finisher, which simplifies the polishing process by eliminating the need for multiple products.

Yes, the Menzerna Heavy Cut Compound 400 can be applied by hand, which is useful for detailed work or for users who prefer manual control.

It is effective for removing light to medium deep-set scratches, as well as hologram effects and uneven matting on the car's paint surface.

Menzerna recommends using the red Heavy Cut Foam Pad for machine application and the green Soft Cut Foam Pad, which is also suitable for beginners.

For machine application, approximately six small drops are recommended for a 50x50cm space to achieve perfect results.

While its main function is correction, the polishing process with this compound enhances the paint's brightness and provides a smoother surface that offers better protection from environmental impact and makes cleaning easier. It is recommended to follow up with a wax or sealant for long-term protection.

Yes, it is designed to be beginner-friendly with clear instructions and recommended pad pairings to help achieve good results.

Ensure the surface is clean and dry. Confirm you are using the correct pad and polishing machine. Increase pressure slightly or make additional passes if necessary, being mindful not to overheat the paint.

This can occur with aggressive compounds. Ensure the product is properly worked down and that you are using a finishing pad or moving to a finer polish after using the Heavy Cut Compound 400 if extensive correction was needed.

Work in smaller sections. Ensure the pad is not too dry; a slightly damp pad can help with lubrication. Avoid polishing in direct sunlight or on hot surfaces.

Use a clean, high-quality microfiber towel. If residue is stubborn, slightly dampen the towel or use a dedicated detailing spray to help lift the polish.