Best current price£44.86from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£44.86Visit shop Sandtex 10 Year Multi Surface Satin Paint 2.5L Seclusion 5010131585142
Visit shop
B&Q£48.00Visit shop B&Q - 10 Year Seclusion Satin MetalPlastic & Wood Multi-Surface Paint2.5L
Visit shop8 offers from £44.86 - £50.99
View price history by clicking the chart icon.
The Sandtex 10 Year Exterior Seclusion Multi-surface Satin Paint in Blue is designed for homeowners and DIY enthusiasts seeking a durable, long-lasting finish for various exterior surfaces. Its key benefit is up to 10 years of trusted protection against weathering, cracking, and flaking, with a convenient self-priming and undercoating formulation. A potential caveat is that it is a water-based paint, which may require specific application techniques compared to oil-based alternatives.
| Colour | Blue |
|---|---|
| Brand | Sandtex |
This paint is specifically formulated for exterior use and may not be ideal for interior applications due to its properties and finish.
The '10 Year Trusted Durable Protection' refers to the expected performance under normal exterior conditions. It's a measure of the paint's expected longevity, not a formal warranty against all failures.
For routine cleaning, use a damp cloth. For tougher marks, a mild detergent solution can be used. Avoid harsh or abrasive cleaners which could damage the finish.
For most exterior surfaces like masonry and primed wood, it acts as a self-primer and undercoat. However, for bare non-ferrous metals like aluminium, a specific metal primer is recommended before applying this paint.
The paint provides a soft, low-sheen satin finish, offering a subtle and attractive look without being overly glossy.
Two coats are generally recommended for best results, ensuring optimal durability, coverage, and color depth.
Apply when the air and surface temperatures are between 8°C and 32°C. Avoid applying in direct strong sunlight, rain, or frost.
Ensure the surface was properly cleaned, dry, and free from contaminants before application. Check if a suitable primer was used on non-ferrous metals. Ensure the previous surface was sound and not flaking.
Apply paint evenly using smooth, consistent strokes. Avoid over-brushing or working the paint too much. Ensure paint is well-stirred and at an appropriate temperature for application.
Ensure application occurred within the recommended temperature and humidity range. High humidity or low temperatures can significantly slow drying. Ensure adequate ventilation.
While the paint is mould-resistant, severe environmental conditions may still allow for growth. Ensure surfaces are thoroughly cleaned of existing mould before painting and address any underlying moisture issues.
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. For previously painted surfaces, lightly abrade if necessary. For bare, porous surfaces like unpainted wood or masonry, a single coat of Sandtex 10 Year Exterior Multi-Surface Paint can act as primer and undercoat. For non-ferrous metals like aluminium, a specific primer might be recommended by the manufacturer before applying this paint.
Application: Stir the paint thoroughly before use. Apply with a good quality brush or roller suitable for water-based paints. Apply evenly, avoiding over-brushing. Two coats are recommended for best results and maximum durability. Allow adequate drying time between coats.
Coverage: Approximately 10-12 square meters per litre, depending on the surface.
Drying Time: Touch dry in 1-2 hours. Recoatable after 4 hours.
Compatibility: Suitable for exterior masonry, primed wood, and metal (including aluminium and non-ferrous metals with appropriate preparation).
Care: Clean application tools immediately after use with water. For cleaning the painted surface, use a damp cloth and mild detergent if necessary. Avoid abrasive cleaners.
