Best current price£55.00from eBay
Shopping.co.uk recommended and popular offers
eBay£55.00Visit shop FloPlast SP169 110mm Access Bend 92.5 Degree Cast Iron Effect Single Socket Soil
Visit shop4 offers from £55.00 - £145.51
View price history by clicking the chart icon.
The FloPlast Ring Seal Soil Access Bend is an essential component for DIYers and professional plumbers looking to manage 110mm PVC soil systems efficiently. It allows for a 92.5-degree change in pipe direction while providing a critical maintenance access point, ensuring that blockages can be cleared without dismantling the entire pipework. While its cast iron effect finish offers a sophisticated aesthetic, users must ensure the pipework is properly supported to prevent sagging due to the weight of the system, despite the PVC construction.
| Brand | FloPlast |
|---|
This is a push-fit ring seal fitting. While it can connect to standard 110mm systems, it is not a solvent weld fitting.
No, the fitting is made of high-quality PVC with a cast iron effect finish, so it will not rust.
This product is specifically designed for above-ground soil and vent systems.
A hacksaw to cut the pipe, a file to deburr the edges, and silicone lubricant are the primary tools required.
Inspection frequency depends on usage, but checking it once every 12 months is standard practice for residential systems.
Ensure the pipe is inserted fully, the seal is free of debris, and use a proper pipe lubricant.
Gently tap the cap with a rubber mallet to break the seal or use a strap wrench to gain better leverage.
Check that the pipe has the correct gradient/fall and add additional pipe clips to prevent sagging.
To install, ensure your 110mm soil pipe is cut cleanly and deburred. Lubricate the ring seal using a silicone-based pipe lubricant before inserting the plain spigot end into the socket. The bend should be secured using standard 110mm pipe brackets to ensure the system does not move or shift over time. For care, simply wipe the exterior with a damp cloth to maintain the cast iron effect appearance. If an inspection is required, use a wrench to carefully unscrew the access cap, ensuring you do not overtighten it when replacing the seal to prevent cracking the threads.
