Rittal VX IT 19-Inch Slide Rails - Silver - 5302035

These rails have a load capacity of up to 80kg per pair, making them suitable for most standard servers and networking equipment.

They are primarily designed for Rittal VX IT rack systems. While they are built for standard 19-inch mounting, compatibility with other rack brands and depths should be verified against the 600-825mm adjustable range.

The depth is adjusted by loosening the screws securing the rails to the rack's mounting angles, sliding the rails to the desired position between 600mm and 825mm, and then re-tightening the screws.

The rails are constructed from high-quality steel plate with a zinc finish for durability and corrosion resistance.

The product comes with two rails per pack, which is sufficient for mounting one piece of 19-inch equipment.

Standard tools such as a screwdriver or wrench suitable for M6 or M8 screws are typically required for installation, depending on your rack's hardware.

Yes, any standard 19-inch rack-mountable equipment, such as patch panels, network switches, or KVM drawers, can be mounted using these rails, provided the weight and dimension requirements are met.

Ensure the rack's internal mounting depth is between 600mm and 825mm. Adjust the rail's variable depth mechanism to match the specific distance between front and rear mounting angles.

Check for obstructions on the rail or within the sliding mechanism. Ensure the rails are mounted securely and parallel to each other within the rack. Clean and lightly lubricate the sliding surfaces if necessary.

Verify that the load capacity of 80kg per pair is not exceeded. Ensure all mounting points are securely fastened to both the equipment and the rack's mounting angles.

Confirm you are using the correct size and type of screws for your specific server rack's mounting angles. Standard Rittal racks typically use M6 or M8 screws.