SYLVANIA LED Golf Ball Bulb - 6W - E14 - 2700K - 806lm - Non-Dimmable - E

Currently unavailable

Currently unavailable
This SYLVANIA 6W LED Golf Ball Bulb is designed for users seeking to replace traditional incandescent or halogen ball lamps in decorative fixtures with an energy-efficient alternative. Its primary benefit is replicating the classic aesthetic and performance of older bulbs while consuming significantly less power. A key caveat is that this bulb is non-dimmable. It features a clear spherical glass, E14 screw base, omni-directional light distribution, and a warm white 2700K color temperature, providing 806 lumens of light equivalent to a 60W incandescent bulb, all while operating on 240V and falling into energy efficiency class E.
| Energy Efficiency | E |
|---|---|
| Model Part Number | 29533 |
| Brand | SYLVANIA |
No, the SYLVANIA 6W LED Golf Ball Bulb is non-dimmable. It is designed for use with standard on/off light switches only.
The color temperature is 2700 Kelvin (K), which is considered warm white, providing a cozy and inviting light.
This means the bulb produces a similar amount of light (lumen output) as a traditional 60-watt incandescent bulb, but it only consumes 6 watts of power.
This bulb features an E14 / SES screw base, commonly found in decorative lighting fixtures.
Energy efficiency ratings range from A (most efficient) to G (least efficient). An 'E' rating indicates moderate energy efficiency. While better than older incandescent bulbs, newer LED bulbs may achieve higher ratings (e.g., A or B).
This bulb is intended for indoor use in appropriate fixtures. For outdoor use, ensure the fixture provides adequate protection from the elements and is rated for outdoor use.
While specific lifespan hours are not provided, LED bulbs typically last much longer than incandescent bulbs, often tens of thousands of hours, significantly reducing replacement frequency.
Ensure the bulb is screwed in securely. Verify that the fixture is receiving power and the switch is on. Check if the bulb is compatible with the fixture voltage (240V). If the issue persists, try the bulb in a different known working E14 fixture.
Flickering can occur if the bulb is used with a dimmer switch (as this bulb is non-dimmable). Ensure the bulb is properly seated in the socket. Check for loose wiring in the fixture or a faulty switch.
LEDs are designed for stable brightness. If brightness has significantly decreased, ensure proper ventilation within the fixture. If the bulb is old (years of use) and brightness has reduced, it may be nearing the end of its lifespan, though this is uncommon with LEDs.
Setup:
Compatibility:
Care: