Gtechniq Crystal Serum Light Ceramic Coating - 50ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Gtechniq Crystal Serum Light Ceramic Coating is designed for car owners seeking durable, high-gloss paint protection with an easy application process. It offers substantial defense against environmental contaminants and maintains a brilliant shine for 3-5 years. A key consideration is the meticulous surface preparation required for optimal adhesion and longevity.
All features
| Brand | Gtechniq |
|---|
Extended Product Information
FAQs
How long does Gtechniq Crystal Serum Light last?
Crystal Serum Light is designed to provide durable protection for 3 to 5 years when applied correctly and maintained properly.
Can I apply this coating myself?
Yes, Crystal Serum Light is formulated for DIY application. However, meticulous surface preparation is crucial for optimal results.
What is the difference between Crystal Serum Light and other ceramic coatings?
Crystal Serum Light offers a balance of professional-grade durability and user-friendly application, providing a significant upgrade over traditional waxes and sealants while being more accessible than professional-only coatings.
Do I need to polish my car before applying?
Yes, paint correction and polishing are highly recommended before application to remove imperfections and ensure the coating bonds optimally to a clean, smooth surface.
How much product do I need for my car?
The 50ml bottle is sufficient for one medium to large car, covering all exterior painted surfaces.
What temperature should I apply it in?
It is best applied in temperatures between 5°C (41°F) and 25°C (77°F) in a dry, well-ventilated area away from direct sunlight.
Can I layer other waxes or sealants over Crystal Serum Light?
While not necessary due to its durable nature, you can use Gtechniq's own topcoats or detail sprays. Avoid traditional waxes and sealants as they may interfere with the coating's hydrophobic properties.
Troubleshooting
Streaking or high spots after application
Immediately buff the affected area with a clean, soft microfiber towel. If the streaks have cured, you may need to perform a light polish to remove them and reapply the coating to that section after degreasing.
Coating not beading water effectively
This can indicate incomplete curing or contamination. Ensure proper application and curing conditions. Reapplication might be necessary if the surface was not properly prepared or if exposed to contaminants too soon.
Difficulty removing the coating haze
Work in smaller sections during application and ensure you are buffing off the residue within the recommended 1-2 minute window. Use a fresh microfiber towel for each section.
Pros and Cons
Pros
- Provides excellent, long-lasting paint protection.
- Achieves a professional-grade high-gloss finish.
- Relatively easy to apply for a ceramic coating.
- Enhances the vehicle's resistance to dirt and water.
- Reduces the frequency of car washing and detailing.
Cons
- Requires thorough surface preparation (decontamination, claying, polishing).
- Application temperature and humidity sensitive.
- Once applied, it is semi-permanent and difficult to remove without correction.
- Not a replacement for paint correction; it seals existing imperfections.
- Requires specific aftercare to maintain performance.
Setup, Compatibility & Care
Setup:
- Thoroughly wash and decontaminate your vehicle. This includes using a clay bar to remove bonded contaminants.
- Polish the paintwork to remove any swirl marks or imperfections. Crystal Serum Light seals the paint *as is*, so a defect-free surface is crucial.
- Degrease the surface using an isopropyl alcohol (IPA) solution to remove any remaining oils or residues.
- Apply Crystal Serum Light evenly using the provided applicator pad in a cross-hatch pattern, working on small sections at a time.
- Remove the coating haze within 1-2 minutes with a clean microfiber towel before it fully cures.
- Allow the coating to cure for at least 12 hours in a dry environment, away from direct sunlight and moisture.
Compatibility:
- Compatible with most automotive clear coats.
- Ensure the surface is free of waxes and sealants before application.
Care:
- Wash the vehicle using pH-neutral shampoos.
- Avoid harsh chemicals or abrasive cleaners.
- Use Gtechniq’s range of maintenance products, such as their car shampoo and quick detailer, for best results.
- Do not wash the vehicle for at least 48 hours after application to allow for initial curing.