Best current price£64.99from eBay
Shopping.co.uk recommended and popular offers
eBay£64.99Visit shop MORTAR MIXER CEMENT PLASTER PAINT HEAVY DUTY 230V 1200W MIXING PADDLE CT0950
Visit shopeBay£83.99Visit shop Paddle Mixer 1200W 230V Variable Speed Soft Start 80L Mortar Plaster 120mm
Visit shop5 offers from £64.99 - £83.99
View price history by clicking the chart icon.
The Neilsen CT0950 is a 230V, 1200W mortar mixer designed for efficiently blending building and chemical materials, including heavy or high-density substances like mortar. Its key benefit is the powerful motor and variable speed control that ensures thorough mixing, even with difficult materials. A potential caveat is its 80L maximum volume capacity, which may not suit very large batch requirements. This electric mixer features two speed settings (0-500rpm and 0-700rpm) and a soft start function for controlled operation.
| Model Part Number | CT0950 |
|---|---|
| Brand | Neilsen |
The Neilsen CT0950 can mix up to 80 liters of material in a single batch.
It is designed for mixing building materials like mortar, plaster, cement, and grout, as well as chemical materials such as adhesives and paints. It is not suitable for flammable liquids.
Yes, it is supplied with one 120mm paddle.
The mixer features a dual-speed selection, typically with settings I (0-500rpm) and II (0-700rpm). Refer to the product manual for the specific location and operation of the speed selector.
Regular cleaning after each use is essential. Carbon brushes should be checked periodically and replaced if worn. Keep ventilation slots clear of dust.
The mixer is supplied with 1 extra carbon brush, 2 flange spanners, and 1pc 120mm paddle.
It requires a standard 230V, 50Hz power supply.
Verify that the power cord is securely plugged into a working 230V outlet. Check if the on/off switch is properly engaged. Ensure the paddle is correctly fitted and not obstructing the motor.
Reduce the amount of material being mixed, especially if it is very dense. Ensure the ventilation slots are clean and unobstructed. Check if the correct speed setting is being used for the material's viscosity.
Ensure the paddle is securely tightened to the shaft. Check for any damage to the paddle or shaft. Make sure the material being mixed is not unbalanced in the container.
Consult the user manual for correct operation of the speed selector. If the issue persists, there may be an internal fault requiring professional inspection.
Setup:
Compatibility:
Care:
