Best current price£13.10from eBay
Shopping.co.uk recommended and popular offers
eBay£13.10Visit shop U-Pol Power Can ALLOY WHEEL SILVER Paint 500ml x 2 Car Spray Aerosol
Visit shop2 offers from £13.10 - £15.26
View price history by clicking the chart icon.
The U-pol Powercan Silver is an ideal solution for automotive enthusiasts and DIY mechanics looking to restore or customize alloy wheels with a professional-grade finish. Designed for ease of use, this high-quality metallic spray paint offers excellent coverage and a uniform light shade that mimics factory wheel aesthetics, though it requires careful surface preparation to ensure proper adhesion and a long-lasting, chip-resistant result.
| Colour | Silver |
|---|---|
| Model Part Number | PCAS/AL |
| Brand | U-Pol |
| Container Volume | 500ml |
This paint is specifically formulated for alloy surfaces. For plastic trims, a plastic-specific adhesion promoter is required first.
While the paint has good adhesion, using an appropriate alloy wheel primer will significantly improve durability and longevity.
A single 500ml can is often enough for touch-ups, but for a full set of four wheels, we recommend at least two cans for proper coverage.
It is designed to handle standard brake heat, but it is not intended for high-performance track use where temperatures may exceed normal driving thresholds.
Yes, applying a clear coat will enhance the metallic finish and provide a protective layer against environmental wear.
We recommend waiting 10-15 minutes between light coats, depending on ambient temperature and humidity.
Shake the can more thoroughly and ensure the nozzle is clear of dried paint buildup.
Apply thinner, lighter coats from a further distance and allow more drying time between passes.
The surface was likely not cleaned or scuffed properly. Sand the area and re-apply according to preparation instructions.
Before use, shake the `Powercan` vigorously for at least two minutes to ensure the metallic pigment is thoroughly mixed. Ensure the surface is sanded down with fine-grit sandpaper and wiped clean with an isopropyl alcohol-based cleaner before application. The product is primarily formulated for automotive and bike alloy wheels. Once the paint is fully cured, you may apply a clear coat for added protection against chemicals and UV rays. Store the can in a cool, dry place and clear the nozzle by holding the can upside down and spraying for two seconds after each project to prevent clogging.
